Question about 2001 Cadillac Catera

Open Question

Replace the license plate lights on a 2001 Catera?

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Light Bulb Replaement

I just replaced the license plate lamps on my 2004 Deville DTS.
Lamp is PC195. Lamp PC168 will also work, (it was in my car for the last two years), but it is a brighter bulb than needed.

You pop out the lamp holders by pushing (sliding)the right side towards the left. That little push will unhook plastic tabs from the sheet metal and the right side of the lamp holder will release from the trunk. See the attached photo.

To push the lamp holder, I used a narrow putty knife covered with masking tape. A screwdriver will work as well. The masking tape protects the paint from scratches.

Posted on Jan 08, 2009

Ad
  • 1 Answer

SOURCE: license plate light

If you place the flate blade of a screwdriver to the right side of the light(s) housing. And push gently to the left the catch will release and the unit will drop out of the trunk lid. Twist the bulb 1/4 turn and remove. Just reverse the process to complete.
Open the trunk to eye level to see to make it easier to see. Applies to all 02-05 Devilles

Posted on Feb 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MRear license plate light Or fuse on a 2001 Ford Ranger


The license plate lights get B+ power from headlamp switch . No seprate fuse for those lights , Bulb's good ? Headlamps , park lamps all work ?

Aug 21, 2016 | Ford Cars & Trucks

1 Answer

Where are my licence plate lights on a 2001 pontiac sunfire and how do u get to them


Remove the license plate and remove the lamp assembly. 2 screws. Bulb is behind.

Oct 01, 2015 | 2001 Pontiac Sunfire

2 Answers

Tail lights work but why don't license plate lights?


The license plate lights have their own separate bulbs. If you are able to replace the bulbs, that may solve your problem. If not, you may have a loose or rusted connection to the plate bulbs only. If you are able to gain access, you may want to check the condition of the harness that supplies the power to the license plate portion. Good luck and have a great day.

Aug 30, 2015 | 2001 Toyota Tacoma

1 Answer

2001 license plate bulb


Use a screwdriver in the recess on the plate light. Pry out the light unit. Release bulb from the contact spring. Install the bulb using a reversal of the removal procedure. Make the tension of the contact springs sufficient to hold the bulb firmly.---------------------------------------------------------------------------------------------
Renault CAN Clip V124

Jan 15, 2013 | 2001 Ford Windstar

1 Answer

2001 LeSabre - replace rear license light. The rear license plate lights do not light up the license at night. How do you get to them? What size bulb do you need?


kind of tricky, took me an hour to get it figured out, but you got to open the trunk and take out the 10 or so 10mm nuts sticking out of the backside of the lid, then the whole solid piece where the lights are on the back will slide off, then you can change the bulbs above the license plate and put it all back together, im cant remember off hand the bulb size, but your local auto parts store will have that info when you go to buy them

Mar 05, 2010 | 2001 Buick LeSabre

1 Answer

How to change the license plate light on 2001 ford focus zx3


Take a thin blade screw driver and gently pry between the rubber seal and the metal and pop the light out, replaced the bulb and pop the light back in. works fine.

Mar 22, 2009 | 2001 Ford Focus

1 Answer

My license plate light is out on my 2002 Volkswagon Bug


Hi, press clip from inside and licance plate light assambly come out to you.

Mar 05, 2009 | 2001 Volkswagen Beetle

Not finding what you are looking for?
2001 Cadillac Catera Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6910 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...