Question about Cars & Trucks

1 Answer

How do i uninstall a serpentine belt and to replace it with a new one?

Posted by on

1 Answer

Google a picture or you tube video

Next time, provide a vehicle,year make & model,engine

You should have a picture under the hood & do have one
in the owners manual & owners manuals or on the internet

Posted on Nov 10, 2014

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 7 Answers

SOURCE: Need diagram/schematic for serpentine belt replacement

Should be a tag on the core support somewhere that shows a diagram how to install your belt,usually its right on top where the radiator bolts to core support,open hood look down on top of support or its on the inside of hood open hood and look up see if theres a tag with a diagram of belt installation

Posted on Apr 08, 2009

old marine
  • 1975 Answers

SOURCE: Need diagram to replace serpentine belt for 2003 Merc/ Grand Marq

From the Dayco web site:

a4fa8f6.jpg

Posted on Sep 29, 2009

  • 1757 Answers

SOURCE: replacing serpentine belt on 2000 chevy van need belt diagram

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

I am assuming this "van" is a Chevy Venture?
CLICK
on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/2000/make/chevrolet/model/venture/2000_chevrolet_venture_drive_belt_routing_diagram.htm

Posted on Mar 06, 2010

  • 1757 Answers

SOURCE: Need diagram/schematic for serpentine belt replacement

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I have only been a free contributor to this site for the past 4-months.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.

If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!

Again my apologies...

http://www.2carpros.com/car_repair_information/year/1998/make/dodge/model/ram_van/1998_dodge_ram_van_drive_belt_routing_diagram.htm

Posted on Mar 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rout serpentine belt for 2004 escape


Label under the hood with picture of belt routing

If not there google a picture

WHY did it come off?

Have to know that BEFORE you ruin the next
new belt

Aug 13, 2014 | Cars & Trucks

1 Answer

Serpentine belt diagram for a 2003 Chevy unpalatable 4.3


Pop the hood of the car and locate the serpentine belt routing diagram. The diagram on the 2003 Chevrolet Impala is on top of the fan shroud. The diagram will be a picture of all of the accessory pulleys and how the serpentine belt is routed among the pulleys. This diagram will give you the exact direction for routing the new belt onto the pulleys. If you cannot find a serpentine belt routing diagram, take a notepad and pen and draw out the exact routing diagram of the old belt across the pulleys.

  • 2 Locate the serpentine belt tensioner. It is located below the alternator on the left front side of the engine. The tensioner on the 3.4 liter, 3.5 liter and the 3.9 liter engines will require a 3/8 ratchet to release the belt tensioner. The 3.8 liter engine will require a ratchet and a 15 mm socket for the belt tensioner. Rotate the belt tensioner clockwise to loosen and remove the belt from the belt tensioner pulley.
  • 3 Slide the old belt from the belt tensioner pulley. Remove the belt from the remaining pulleys and pull the belt from the engine compartment.
  • 4 Route the new belt across the crankshaft pulley first. The crankshaft pulley is the big pulley on the bottom of the engine in the center. Then route the serpentine belt across the remaining pulleys as directed by the serpentine belt routing diagram. Leave the belt tensioner pulley for last.
  • 5 Rotate the belt tensioner clockwise again to relieve the tension and slide the new belt across the top of the belt tensioner pulley. Release the belt tensioner and the belt will tighten up as the tensioner applies pressure to the belt. Make sure the new belt is properly seated in all the pulleys.
  • 6 Crank the engine and inspect the belt again to make sure that it stays seated in the pulleys.

  • Read more: How to Replace a Serpentine Belt on a 2003 Chevrolet Impala ' eHow.co.uk http://www.ehow.co.uk/how_6120665_replace-belt-2003-chevrolet-impala.html#ixzz1Yi6QLAjb

    Sep 21, 2011 | 2003 Chevrolet Impala

    2 Answers

    Change serpentine belt on 06 sienna


    1. 1 Check to ensure the Sienna's engine is cold, then make sure the Sienna is in park, the ignition is in the off position and the key is removed from the ignition to prevent any possibility of the engine engaging during the serpentine belt replacement.
    2. 2 Open the hood and locate the serpentine belt routing diagram sticker on the side of the engine casing. Study it for a moment before removing the existing belt. It is essential the new belt be installed exactly as the diagram indicates.
    3. 3 Find the tensioner pulley, the main pulley that controls the serpentine belt, and fit a 1/2-inch socket wrench over the self-tensioner on the outside of the pulley.
    4. 4 Pull the wrench to the left to move the pulley forward, which loosens the belt, then remove the belt.
    5. 5 Compare the old serpentine belt with the new, replacement belt for length, width and number of grooves on the belt's underside. Be certain the replacement belt is the right part.
    6. 6 Fit the new belt on to each pulley according to the serpentine belt routing diagram on the manufacturer's sticker, or according to the drawing made prior to removing the old belt. Fit the new belt on to the tensioner pulley last, again applying pressure on the pulley's self-tensioner with the half-inch socket wrench to loosen the pulley.
    7. 7 Release the pressure on the self tensioner and allow the tensioner pulley to ease back into place, thereby tightening the new serpentine belt with the appropriate tension.
    8. 8 Remove the wrench and close the hood.
    Thank you and good luck,
    Lee

    Aug 26, 2010 | 2006 Toyota Sienna

    1 Answer

    Replace serpantine belt 2004 malibu


    Get a 1/2" breaker bar and remove tension on belt by rotating the tensioner until belt is loose.

    Remove belt noting the under over method.

    Install new belt. The smooth pulleys have the back of the serpentine belt, and the grooved pulleys have the inside front of the serpentine belt up against it.

    In this way you can reroute any serpentine belt on the market.

    Good luck.

    Jul 15, 2010 | 2004 Chevrolet Malibu

    2 Answers

    2000 Ford Focus serpentine belt replacement


    How To Install Replace Engine Serpentine Belt Ford Focus Zetec DOHC 1AAuto.com


    Jan 19, 2010 | 2000 Ford Focus

    1 Answer

    Replace serpentine belt on 2000 ford focus


    Here is a link to the diagram you will need to put the new belt on...

    http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7002

    Here is a link to a video which will show you how to replace the serpentine belt...

    http://www.wonderhowto.com/how-to/video/how-to-inspect-and-replace-your-car-s-serpentine-belt-267229/

    Oct 03, 2009 | 2000 Ford Focus

    1 Answer

    Maxima 2006 drive belt


    First, keep this link which is to the diagram of the serpentine belt. It will be useful in knowing how to route th new belt...
    http://www.gates.com/common/part_locator/view_diagram.cfm?id=S4003

    Next, here's a link to a good video on how to replace a serpentine belt...
    http://www.wonderhowto.com/how-to/video/how-to-inspect-and-replace-your-car-s-serpentine-belt-267229/

    Sep 12, 2009 | 2000 Nissan Maxima

    2 Answers

    Squeaky noise from serpentine belt


    Replace the serpentine belt tensioner. Expect to pay approx $150.00 if installed by a mechanic.

    Dec 28, 2008 | 2003 Toyota Corolla

    1 Answer

    Serpentine belt replacement on 2001 impala


    I bought a new belt and it had a series of diagrams for different engines on the cardboard packaging (ie GM 3.8L). I needed it for my '01 Impala.

    Sep 01, 2008 | 2001 Chevrolet Impala

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    19 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    75822 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...