Question about Cars & Trucks

1 Answer

I have a zetech engine nw Da bolt on the head next 2 da spark plug is damaged! Wil this coz harm 2 da engine?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 216 Answers

THAT IS A HEAD BOLT, YOU WILL BLOW THE HEAD GASKET OVER TIME.

Posted on Nov 10, 2014

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 8 Answers

SOURCE: interrior lights stay on

are your dasboard lights at full brightness?Turn your headlight switch(it may be on the interior light detent).BTW I drive a '97 Bonneville SE and one great thing about these cars is that if you leave a light on it will shut off after about 5 minutes so it won't drain your battery overnight.

Posted on Nov 14, 2009

  • 85 Answers

SOURCE: 2000 Ford Ranger- engine stalling when slowing down to idol

replace th air idle bypass valve this is located on the throtle body and has 2 screws with 1 plug with 2 wires to it

Posted on Dec 29, 2009

  • 14585 Answers

SOURCE: Heyyy..... i bought a 2007

Sounds like a head gasket to me. if you go thru that much water in two days you should be seeing white smoke out the exhaust system.
Good luck

Posted on Nov 10, 2010

  • 128 Answers

SOURCE: se apagó, da arranque pero no enciende

la alarma tiene un seguro para la bomba de gas prende y apaga la alarma varias veces y trata de nuevo

Posted on Dec 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My car lacks power bt wen i take out da air flow it gains power bt start jurking after a while.what could da problem be?


You could have a bad spark plug. May just need plugs and wires but be sure to gap the plugs. If the check engine light is on have the codes checked if it's using a lot of gas it could be he oxygen sensor.

Nov 09, 2014 | Cars & Trucks

1 Answer

Da bolt on the head next 2 da spark plug is damaged! Wil this coz harm 2 da engine?


It is vital that all the head bolts are operational so that the correct tension is applied to the head and gasket. If the bolt has full tension then it should be ok but if the head has broken off then gasket failure will result in time.

Nov 09, 2014 | Cars & Trucks

2 Answers

I have a zetech engine.da bolt of my oil plug is


Shouldn't hurt it as long as our not leaking any oil . Next time you change your oil I would get a new plug at your local parts store ther only about $5

Nov 09, 2014 | Cars & Trucks

1 Answer

How to change the outer seal near da tire on a 1985 chevy silveraldo rearend


you need to remove the cover in the middle of the rear axle rotate the drive shaft until you see a bolt with a 5/16 head on it slide out the pin that the bolt held in remove the c clip that holds the axle in slide out the axle and replace the seal you should do both sides while its apart then put it back together and fill threw the plug on the front side that uses a 3/8 drive

Mar 30, 2012 | Cars & Trucks

4 Answers

Heyyy..... i bought a 2007 model ford ikon flair 1.3 rocam, 2 weeks ago. Now its giving me heating problem... i have to fill in water daily. Water vanishes very quickly in about 2 days... and the fan...


Sounds like a head gasket to me. if you go thru that much water in two days you should be seeing white smoke out the exhaust system.
Good luck

Nov 10, 2010 | Ford F Cars & Trucks

1 Answer

Where are you spark plugs on a 2006 Ford Fusion. I have changed many vehicles Spark Plugs but Im not familiar with this model and do I have to remove the intake manifold to get to them ???



Inspection & Gapping

Fig. Inspect the spark plug to determine engine running conditions


Removal & Installation

2.3L Engine

  1. Disconnect the negative battery cable.
  2. Remove the 2 nuts, the bolt and the alternator air inlet duct.

    0996b43f807cb98c.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Remove the 2 nuts, the bolt and the alternator air inlet duct-2.3L engine

  3. Disconnect the 4 ignition coil-on-plug electrical connectors.
    NOTE When removing the ignition coil-on-plugs, a slight twisting motion will break the seal and ease removal. Remove the 4 bolts and the ignition coil-on-plugs.

    WARNING Only use hand tools when removing or installing the spark plugs, or damage can occur to the cylinder head or spark plug.

    NOTE Use compressed air to remove any foreign material in the spark plug well before removing the spark plugs.
  4. Remove the 4 spark plugs.

To install:
  1. Inspect the spark plugs, as outlined in this section.
  2. Adjust the spark plug gap, as necessary, to 1.25-1.35mm (0.049-0.053 in.).
    WARNING Only use hand tools when removing or installing the spark plugs, or damage can occur to the cylinder head or spark plug.
  3. Install the spark plugs and tighten to 12 Nm (9 lb-ft).
    NOTE Apply a small amount of dielectric grease to the inside of the ignition coil-on-plug boots before attaching to the spark plugs.
  4. Install the 4 ignition coils and bolts and tighten to 10 Nm (89 lb-in).
  5. Connect the 4 ignition coil electrical connectors.
  6. Install the alternator air inlet duct and the 2 nuts and the bolt. Tighten to 6 Nm (53 lb-in).
  7. Connect the negative battery cable.

Oct 12, 2010 | 2004 Toyota Corolla

1 Answer

What motors are interchangeable with a 1998 ford escort


you can fit a zvh engine which is a 1800cc zetech block with a 1600cc rs turbo head bolted on and will fir in without too much trouble or a standard 1800cc zetech engine will go in

let me know if this helps

cheers

Feb 19, 2010 | 1998 Ford Escort

2 Answers

1992 oldsmobile 98 start up problem.turns over,gas is getting 2 top


You may have a sensor problem, or an ignition problem. I would need more info to help you.

Oct 11, 2008 | Oldsmobile 98 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...