Question about 2002 Dodge Stratus
Poss. bad 02 sensor. you need to have it scanned for codes. on this engine the water comes out of the engine on the side of the block. you have to bleed the air out of this system. thats what the bleeder is for. the hose that fits there is where the water goes into the engine.
Posted on Jan 05, 2015
It sounds like the auto choke is getting stuck or not shutting off
Posted on Nov 09, 2014
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 95 saturn won't start when hot
Blair, I would take a look at he TPS (throttle position sensor) located on the throttle body. In other words, it sounds as thought sensor when heated is changing its value to "open" or "shorted".
If the car starts OK when cold, use a hair dryer to heat the TPS when the engine is cold to see if you can duplicate the problem.
Also is the a service engine light on? Codes?
If you have a "digital volt/ohm meter" available you can read the variable resistance of the sensor when the problem occurrs to determine if the sensor is defective.
Posted on Feb 09, 2009
SOURCE: Car stalled. restarted and did a
try blowing out all the fule lines and changing the fule filters the lines may be blocked up also check the fule tank vent if this is blocked the pump cant **** fule from it
Posted on Mar 07, 2010
Tips for a great answer:
Oct 24, 2014 | 1998 Dodge Stratus
Nov 07, 2013 | Dodge Cars & Trucks
Dec 30, 2011 | Dodge Stratus Cars & Trucks
Aug 27, 2011 | 2002 Dodge Stratus
Jul 28, 2009 | 2002 Dodge Stratus
Jun 27, 2009 | 2002 Dodge Stratus
Dec 29, 2008 | 2002 Dodge Stratus
Nov 26, 2008 | 2002 Dodge Stratus
75 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: