Question about 2003 Buick Century
Dashboard light out how do I remove the dashboard to replace it
You will probably find it easier if you just take out the clocks and unplug the loom from them then its just twist and turn the bulb out find a replacement and hey presto
Posted on Nov 11, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The coolant level sensor is located on the radiator. If you are looking at the engine from the front of the car it will be on the left side. There will some kind of clip holding it in the radiator. Removed the clip and pull the sensor out. You will lose coolant so try to swap it out quick or drain some of the coolant out. Once new sensor is installed, install clip to keep the sensor in place and reconnect the wires to the sensor. Crank the engine and make sure the coolant level is full. This should correct your problem.
Posted on Jan 04, 2009
yes you will you will have to take side trims and sill panel off get a 10 mm ready and take the bolts out the tail liaghts should come out the license lamps have screws in them and if you looka t them but you should be able to twist bulbs and pull them out / Please rate my response thank you very much
Posted on Jan 30, 2009
Inside the trunk, under the carpet behind the tail lights will be a whole bunch of small plastic nuts, running from one side of the car to the other. Take all of these plastic nuts off, and the whole tail light assembly will come off in one large piece. Find the bulb you need to replace, and reassemble
Posted on Apr 06, 2009
You will need to take the car to a dealership to have the service department unlock the radio for you. They have a special code to unlock the radio and then you are required to change the code to one that you will remember. An appointment should not be needed because this takes about 5 minutes. I do not remember the code, sorry.
Posted on May 18, 2009
this is a process and I would reccomend you get the manual either from your local library or that you buy one from your local autoparts or book store. you have to take the dash apart to do this and it is rather complicate and has many connectors hidden and othwerwise and the manual will help greatly
Posted on Aug 26, 2009
Tips for a great answer:
Sep 08, 2016 | 2003 Buick Century
Nov 09, 2014 | 2003 Buick Century
Jun 15, 2011 | 2003 Buick Century
Mar 02, 2011 | 2003 Buick Century
Nov 06, 2009 | 2001 Buick Century
Oct 26, 2009 | 2003 Buick Century
Aug 26, 2009 | 2003 Buick Century
Jul 15, 2009 | 2003 Buick Century
Dec 22, 2008 | 1995 Buick Century
Oct 01, 2016 | 2003 Buick Century
109 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: