Question about Cars & Trucks

1 Answer

How do I install hill decent on ford territory?

The territory comes with hill decent as a optional extra, is it a matter of installing a switch to operate or is it a bit more complex

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 5,433 Answers

Much more complex! Hill descent controls the accelerator, brakes and traction.

Posted on Nov 09, 2014

Testimonial: "Ok Mikey, thanks for the help. I was hoping because it has traction and cruise control that it would be simple upgrade (wishful thinking) thanks again"

  •  Mikey
    Mikey Nov 12, 2014

    Hill descent is a superb bit of kit on any all wheel drive vehicle only if using off-road! I believe the cost of adding this to your vehicle from new was 900 aus dollars, this still could be added but you would need the electronic control module along with the switch!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Towing capacity of a a988-90 ford bronco II with auto transmission


Don't. Just don't. It's a French designed transmission and doesn't handle extra torque well. The 2.9L and 3.0L motors do have decent power but they are under supported by the automatics. If you are determined to try anyways, try and keep it below 1,200lbs and stray away from steep hills.

Dec 30, 2014 | 1988 Ford Bronco II

1 Answer

Ford territory back seat console can it be removed


Ok it had to be installed right? I am not up to date with the ford territory's but most installs are basically the same. Look inside of console on the bottom will most likely be small squares of plastic with a notch on one side. Using a small regular screwdriver pry it and all others up to reveal the bolt. remove all and it should come out! I seriously don't think that ford would mount it from underneath the car. But anything is possible after 2005! Things got harder to work on! good luck! And let me know how it goes.

Jun 29, 2014 | 2006 Ford Explorer

1 Answer

Why is my Ford territory oil pressure light intermittently coming on


Good Day

Firstly check your all Oil pressure switches if they are not faulty.
Remove your electrical oil pressure switch and fit a mechanical oil pressure switch and start the motor:Oil Pressure reading should be between 4-8 bar on the gauge.
Motor must be at working temperature.
If Oil Pressure is below 4 bar their could be a problem on your crankshaft.Depending on milage.
Your Big end and Main bearings determine your oil pressure.
If the engine milage is high this can cause oil pressure fluctuation as their is wear on the bearings.

Regards
Martin

Jun 12, 2014 | 2007 Ford Territory 4.0

1 Answer

Can a 2005 awd territory be driven on rear tail shaft only


With an AWD vehicle there is a diff in the transfer case that allows different speeds between front and read axles . If you have 4wd button (lever ) that allows the diffs to be locked for slippery /off road conditions then it can be driven with out the front drive shaft if you have it in 4wd. If you do not have that option then without the front drive shaft it will go nowhere.

May 04, 2014 | 2006 Ford Territory 4.0

1 Answer

Speakers not working


if you have installed a aftermarket stereo I would check your connections sounds like you're heading metal inside of the housing somewhere had a Mustang do the same thing to me.

Feb 08, 2014 | Ford Cars & Trucks

1 Answer

Hill decent control and Traction control lights


These landrovers have a lot of Electrical faults.The first thing i would recomend is to change the switch.Has this is the cheapest option.Hope that works for you.

Nov 08, 2009 | 2002 Land Rover Freelander

1 Answer

Land Rover freelander hill decent


The hill descent switch wires have broken off on the switch.Pull down the gear lever cover and remove the micro switch ,solder the wires back on and refit.

Jul 04, 2008 | 2003 Land Rover Freelander

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...