Question about Cars & Trucks
What contorl unit, if u are talking about the a/c - heater and radio control unit doing this, then most likely the unit is bad, and need fixing or changing
Posted on Nov 09, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Enter the radio code, take your car to the dealership with proof of ownership and they can get it for you, you should have it from the previous owner or if you bought it new, to enter it, hold the pscan and rbds buttons for a few seconds, then numbers will show up, press the corresponding buttons to change the numbers, when you have your code in, hold pscan and rbds buttons for a few seconds. when you release the radio should unlock, good luck
Posted on Jan 06, 2009
Remove the tires, Remove the calaper bolts, (small heads on them 12mm or so) Remove calaper, Pads are setting in a holder. Lube new pads with litheum grease and place in holder. (look at old pads, one or both may have small metel tab on one end) If the new pads have the tab, put that pad where the old pad with the tab was. (ie. tab to the inside) Press pistion in with a 'C' clamp. If it won't go in easly, it may screw in. If the parking brake cable is hooked to the calaper, it probly screws in. Use large pliers to screw in calaper piston. Place calaper over pads and install bolts (lube bolts) Rember to pump brakes befor driving . to get a solid peddle.
Posted on May 20, 2009
The best solution is to use a Vehicle Specific Wiring Kit, as these cars have complex electronics that do not like being overloaded, Also the car has towing specific safety systems (such at Trailer Stability Program) which only work if it knows it is towing. The car will need to be coded to recognise the towbar wiring and work the saftey systems properly after the kit has been installed. It's not cheap however, Expect to pay around £200-£250 for the whole job.
Posted on Jul 21, 2009
Tips for a great answer:
Mar 08, 2015 | 2006 Audi A6 3.2
Mar 01, 2015 | 2006 Audi A6 3.2
Jul 07, 2014 | 2006 Audi A6 2.0
Sep 11, 2010 | 2006 Audi A6
Sep 22, 2009 | 2006 Audi A6
Jun 21, 2009 | 2006 Audi A6
Feb 08, 2009 | 2000 Audi A6
Nov 03, 2008 | 2006 Audi A6
14 people viewed this question
Usually answered in minutes!