Question about Cars & Trucks

1 Answer

I have a 99 silveraldo, after a accident I replaced the air bag but the plug was the wrong one. But now the cruise control doesn't work at all. Worked fine before, inoperable now.

Posted by on

Ad

1 Answer

How did you replace an air bag with the wrong connector ?

Now you ask why do I have other problems

The cruise control is not on the srs system & you won't
have a CAN system on a 1999 vehicle,so work on the
cruise issue

Posted on Nov 09, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 77499 Answers

SOURCE: Cruise control,and radio controls on steering wheel, now air bag

The problem is the coiled ribbon contact under the steering wheel (we call it the clock-spring contact) that connects the stereing wheel controls to the steering column wiring harness, this is a printed circuit that is coiled to allow the wheel to move and still have a psychical contact for the wheel switch's and the airbag, anyway replace that contact coil, u must disarm the airbag to do this repair, follow the factory procedure to do this or serious injury can result if the airbag fires.

Posted on Jan 13, 2009

  • 412 Answers

SOURCE: my air bag light came on and my cruise control and

your clockspring under steering wheel has failed..there is a recall from chrysler for 1996-2000 ns minivans..even if recall was done before,clockspring is under a lifetime warranty..call your local dealer with your information..vin number,mileage and get it replaced

Posted on Jul 19, 2009

SOURCE: no cruise control no radio air bag light on volvo xc90

Sound to me like you have blown a fuse. Anything else not working?

Posted on Nov 18, 2011

123zor
  • 6 Answers

SOURCE: 03 pontiac grand am .air bag code b0026. the cruise and the horn are operative.leads me to believe the clock spring is good the air bag sa been replaced and still has this code

Just because the cruise and the horn are operative does not mean the clock spring is good check the clock spring there is most likly an open in the clock spring.
Tommy

Posted on Jan 22, 2012

emissionwiz
  • 77499 Answers

SOURCE: Horn button and cruise control do not work on my 1998 Toyota Sienna. Air bag light is on. How do I fix this?

This is caused by a part called the clock-spring rotating contact ribbon, it is a coiled up circuit ribbon that connects the steering wheel button and airbag to the steering column electrics. it is under the steering wheel. It needs to be replaced. This can be a dangerous job due the Airbag, so if you do want to try and replace it disconnect the battery negative cable for 15 minutes prior to start of work. The part is about $150.00 You will need special tools.

Posted on Feb 16, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does cruise control not work after air bag deployed?


Have to go back under the steering wheel
as something is amiss

Clock Spring may have gotten damaged & if you didn't
replace the bags, then sloppy work by whom ever did

Aug 12, 2014 | Cars & Trucks

1 Answer

Cruise control not working, air bag light on, horn wont beep


This vehicle has a part called a "clockspring" that is located in the steering column beneath the steering wheel. It is the contact unit for the steering wheel controls and the air bag wiring in the steering column. Sounds like to me that you have a bad "clockspring" and it needs to be replaced. The part is available aftermarket from many parts stores so you don't necessarily have to go back to the dealer for the part. The part is not extremely hard to replace, however, it may not be suitable for a DIYer (requires steering wheel puller). You may want to take it to a trusted repair facility and have them repair it for you. The labor is approximately 1.5 hrs at the given shop rate. Good luck. Hope this helped. Here are a couple of websites.. one for instruction and the other for parts pricing.
Instructon on repair. & Chrysler Forum with info.

Used part on Ebay & New @ Mopar Wholesale

Jan 07, 2014 | Chrysler Concorde Cars & Trucks

1 Answer

After replacing the rack and pinion the air bag light won't go out, the horn works but the cruise does not work 2000 dodge durango


I believe what has happened is: While the column was disconnected from the steering gear someone, even by accident, has turned the wheel (from center), in either direction, more than it normally would when connected. This has damaged or broken the "clocking spring". It may also have damaged the cruise connections. These are located in the steering wheel, under the air bag. The clocking spring tells the system the relative position of the wheel which determines if it is safe to fire the bag, in the event of an accident severe enough to activate the system. This is a complicated repair, and should done by a qualified mechanic.
Don't beat yerself up about it!! People do this everyday.

Aug 16, 2011 | 2000 Dodge Durango

2 Answers

The airbag light stays on and the cruise control does not work


The air bag light has to do with the air bag sensors in the bumper being bad, or the air bag module being bad.

The cruise control not working has to do with a broken cable from the cruise control mechanism, or a blown fuse for cruise control, or the cruise control being turned off.

Oct 13, 2010 | 1998 Jeep Cherokee

1 Answer

2004 acura TL cruise control wont engage...need to get fixed


This is a problem you will to take to a shop, If you are mechanically inclined I can help you, but if not I would not mess with it, it could be the button or it could be the controller and could even just be a fuse, check the fuse and if you don't find the fuse blown then let me know if you have a volt meter and what to test this yourself. You are going to be working around the air bag too and if you probe the wrong wire while testing you could break your arm or leg by deploying the air bag by accident. Or your neck.

Aug 06, 2009 | 2004 Acura TL

1 Answer

My air bag light came on and my cruise control and


your clockspring under steering wheel has failed..there is a recall from chrysler for 1996-2000 ns minivans..even if recall was done before,clockspring is under a lifetime warranty..call your local dealer with your information..vin number,mileage and get it replaced

Jul 17, 2009 | 1999 Plymouth Grand Voyager

1 Answer

2000 Dodge Carivan - Air bag light comes on.


Air bag light on ? Have the vehicle checked for DTC'S - diagnostic trouble code's in the air bag control module . That's the way to find out what the problem is . Suggest you take it to a qualified repair shop.

Jan 03, 2018 | 2000 Dodge Caravan

1 Answer

Cruise control


Bet switches in steering wheel are bad...Very common. Especially if it has a air bag and the air bag light is on...I would clean the switches or if it has a air bag and the light is on replace the clock spring for the air bag and the light will go off and cruise will work again......

Jul 31, 2008 | 1994 Ford Explorer Limited

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14398 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...