Question about Ford Laser

1 Answer

What is the big end bearing settings on a ford laser 1.6 1996 model

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 881 Answers

Hi there
Big end bearings are set when you get them as they are set to the crankshaft grinding so you buy bearings with the crankshaft OR stamped on the bearing shell is the o/s [like 020u/s or 020 o/s
but if the crankshaft is worn at all then dont put any bearings on it untill its been ground.

Posted on Nov 22, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 167 Answers

SOURCE: WOULD YOU KNOW THE TORQUE SETTINGS FOR MAIN

Mains Stage 1 83nm
Mains Stage 2 167nm

Big ends Stage 1 29nm
Big ends Stage 2 45 - 60 degrees

Hope this helps

Posted on Jul 10, 2009

michael_grey
  • 365 Answers

SOURCE: engine bearing torque settings big end and main bearing

4 cylinder correct?
1bac25a.jpg

Posted on Jun 20, 2009

  • 1 Answer

SOURCE: Hi there we just replaced the main and big end

hi there, i got to do the same where did you get yours from and how much were they??

Posted on Nov 05, 2009

Autodarwin
  • 54 Answers

SOURCE: I want to know the torque tension settings for a

I would not trust anyone but the manual on this one got to your local parts store and get a Haynes or Chiltons

Posted on May 27, 2010

  • 9 Answers

SOURCE: main bearings and big end bearings tension specs

This site has all the torque specs you should need make sure this is the correct engine.

http://www.davidfarmerstuff.com/C6Z06-Torque.pdf

Posted on Dec 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need the big end torque on the Rocam engine please


A cheap shop manual will have this and much more. If you are in this deep you probably need one.

Sep 05, 2016 | 2000 Ford Ka

1 Answer

Hi i have daewoo matiz 800cc can you help me by giving me the torque settings for the big end bearing caps please


You are looking for the torque settings for big end bearings and main bearings on a daewoo matiz?
Main bearings torques on a Daewoo Matiz 800cc (1999)
Stage 1: 25-30 Nm
Stage 2: 55-60 Nm
Big End Bearings…

Mar 09, 2016 | Daewoo Cars & Trucks

1 Answer

What is the settings for a ford laser 1.6 1998 model big end bearings


Settings? Your question is not clear. Do you mean torque setting? Or bearing clearance? Be specific. Think about what it is you want to know. And by the way, an Internet forum is NOT the place to get this kind of information. You need to know with absolute certainty what the values are and not depend upon what someone anywhere in the world might tell you over the internet. The Internet is great for many things; this is not one of them. Find a repair book for your vehicle and get your information from a published source. If you are doing this kind of work, you cannot afford to screw it up by not investing in the required manuals. It will pay off in the long run.

Nov 09, 2014 | 1998 Ford Laser

1 Answer

Replace crankshaft bearings on 1999 ford expedition


v6 have 4 main bearing sets and 6 big end bearing sets
v8 have 5 main bearing sets and 8 bigend sets
5 cylinder inline will have 6 main bearing sets and 5 big end set
It appears that some where you are short a set of bearings Check that the rebuild kit is for your engine

Feb 22, 2013 | Ford Cars & Trucks

1 Answer

Wheel bearing


the rear bearing is pressed into the hub so take the hubs off and take to a engineering shop to have the new one pressed in ,now the front ones are similar in as much as they need pressing in and out ,DO NOT TRY TO DO IT WITH A BIG HAMMER ,its dangerous ,remove the wheel trim and slacken the big nut in the middle ,think its a 32mm then jack vehicle up remove the wheel ,undo the brake caliper by the 2 bolts that hold it to the stub axle ,slacken bolt on track rod end but do not remove fully and then wack the end of the stub axle where the track rod end goes through .One good wack with a 1kg hammer will do it on the end of the steering /stub axle shaft without damaging anything because you have left the nut on loose.then remove the bottom track control arm pinch bolt it has a star head and a 17 mm nut on the other end ,use a lengh of scaffold pole or a big crow bar to pull the track control arm down so the ball joint come apart ,take the stub axle off and in the back is a big circlip but leave it alone and just take it to the engineering shop ,its very dangerous to try to remove the bearing with a big hammer and drift because it can and will chip and hit you in the face trust me on this

May 27, 2010 | 2007 Ford Focus (3 Door) Hatchback

1 Answer

I need the torque specs for the main and rod bolt for a 99 escort 2.0l engine


engine tightening torques
Main bearings Renew bolts/nuts No
Main bearings Stage 1 43 Nm
Main bearings Stage 2 85 Nm
Big end bearings Renew bolts/nuts Yes
Big end bearings Stage 1 15 Nm
Big end bearings Stage 2 90°

Jan 21, 2010 | 2004 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...