Question about 2005 Toyota Corolla

1 Answer

Alt belt has tensior 2005 corol

Which one sorry

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 42 Answers

I can't understand what you wrote/didn't write but that was the fluid filled shock absorber tensioner that failed often(leaked fluid out)which would take away it's ability to tension belt correctly-Good Luck,JT

Posted on Nov 12, 2014

Testimonial: "Sorry I no about tension shocks 05 corolla I worked at a dealership for 25 years just toyota. 50 techs, I worked the shop counter ask mark brawn .i needed a help from them And they wanted to charge me 3500'all the help I've given them,that's insane,that's for fixing it but I was helping them as much as they were helping me. That's why understanding the answer was difficult it made as much sence as charging me for there help.ask Neil resin in Fredrick md toyota top tech many years if I know what a tensioner is I'm building a 1931 ford model a right now I also have camry and a celiac.all.redone.my father owner the oldest volvo dealership in country .anyways I just needed there help I'm hurt right now That's what I needed help with.ive been drowning in mucus for the past eight months being treated copd, we'll I have a hernia nc not the best in health care.anyway i just won't help anymore I'll make it easy."

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76109 Answers

SOURCE: when to replace the timing belt and spark olugs in my 2005 coroll

60,000 is the recommended miles, but they will go 90,000 in most cases depending on how easy the car is driven, around town more often.

Posted on Dec 15, 2008

old marine
  • 1985 Answers

SOURCE: need ''dummie'' instructions on changing belt in 91 dodge dynasty

AutoZone has manuals online for many models including yours. Here is the page for drive belts for 6 cylinder engines. If yours is a 4 cylinder, you'll have to go to the manual for 4 cylinder engines.

Posted on Mar 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Serpentine belt is lose, how do you tighten the tensioner pulley on a 1998 saturn sl2


have to replace belt and belt tensior, automatic tension set up belts probrably worn out n stretch out

Sep 24, 2011 | 1998 Saturn SL

1 Answer

2005 corolla fuse block diagram


Hi, on a 2005 coroll ce model both mirrors don't work the radio does the fuses check out ok had used a circuit tester light on the plugs but only hear a click sound the light doesn't light up on tester only a sound,could this be relay is bad?the switch itself or what else can itt be?hope for an answer!thank you

Sep 30, 2010 | 2005 Toyota Corolla

1 Answer

Drive pulley belt slips off at the bottom.


your belt tensior is poss bad check to see if the tensior is easy to move thats what keeps ur belt on or poss have some pulleys out of almingent

Apr 04, 2010 | 2002 Chevrolet Monte Carlo

2 Answers

How do i get the tension out of my belt so i can take the alternator off?


there a belt tensior looks like a pully with a black nut that u push down should be under alt area

Mar 28, 2010 | 1999 Ford Expedition

1 Answer

The main pulley shakes and makes a clicking noise. When I tried to loosen the tensioner belt bolt it came loose easily and won't tighten up all the way, almost like it is stripped. I was thinking that the...


replace the tensior and tesioner pulley.

did you remove the belt before you tried to loosen the bolt? when you say main pulley, do you mean the pulley on the tensioner? by tensioner belt bolt do you mean the bolt secureing the pulley to the tensioner arm?

Feb 26, 2010 | 2005 Chevrolet Cobalt

1 Answer

How do I install alt. belt on 2005 scion xb?


I just looked at my '04 xB. It looks very straight forward.
loosen the bolt that holds the alternator to the bracket.
carefully slide the alt to the bottom. (Also be aware of the plug and wires on the alt.They should never hold the weight of the alternator. You dont want them breaking prematurely.)
Pull the belt off, remove the belt from the crank shaft pulley.

Do the reverse, and you will have replaced the belt.

Make sure to check the belt in about a week or so.
New belts will stretch over time. Make sure you keep the tension tight enough to work correctly, but not so tight that the alernator shaft is warped.
I usually place the new belt on both pulleys and give a good "medium" pull on the alt while tightening. Find the middle of the belt and squeeze them together, depending on the type and length of the belt, there should be about 1/4" of flex on both sides.

May 20, 2009 | 2004 Scion xB

1 Answer

Need ''dummie'' instructions on changing belt in 91 dodge dynasty


AutoZone has manuals online for many models including yours. Here is the page for drive belts for 6 cylinder engines. If yours is a 4 cylinder, you'll have to go to the manual for 4 cylinder engines.

Mar 12, 2009 | 1991 Dodge Dynasty

3 Answers

When to replace the timing belt and spark olugs in my 2005 coroll


60,000 is the recommended miles, but they will go 90,000 in most cases depending on how easy the car is driven, around town more often.

Dec 15, 2008 | 2005 Toyota Corolla

2 Answers

2005 malibu no heat


Possibility your nob/resistor in the nob is bad. The resistor changes current in corolation with nob position.

Sep 16, 2008 | 2005 Chevrolet Malibu Maxx

Not finding what you are looking for?
2005 Toyota Corolla Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...