Question about 2007 Chrysler Sebring Sedan

3 Answers

I have a 2007 Chrysler sebring and drivers low beams will not work.

I damaged the front end of the vehicle in a fender bender which broke the plastic on the front of the headlight. Headlight worked for a while then bulb broke (low beam only). Replaced and that worked for a while until that one broke as well. Tried to replace that bulb and headlight (low beams driver side) still will not work. Changed the fuse and then bought brand new headlight assembly, installed and still low beam will not work. What else could be wrong? The high beams and yellow light on the other side still work.

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 1,326 Answers

The socket is bad. Replace the headlight low beams drivers side not that hard. Can buy them in autozone

Posted on Apr 09, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chrysler Master
  • 2,907 Answers

Check the relays and it's fuse.
Since this was damaged, check the wires for broken hot wire or for bad grounds.
Hope this helps.

Posted on Apr 09, 2015

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 76 Answers

Try the fuses or wire fuse links , the only other thing in the circuit is the wires broken or the light low switch is bad

Posted on Nov 09, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

66 chrgr
  • 1011 Answers

SOURCE: Right side headlight (low beam) dead

clearly volts without amps. pinch wire bad socket or multifunction switch under cover on steering column.

Posted on Jan 25, 2009

  • 1233 Answers

SOURCE: Left low beam headlight on Chrysler 2003 T&C wont work while engine is on

Ill guarantee you have an electrical short on the left side of the headlight switch,circuit.From here its immpossible for me to go any further.Good Luck.,Get A Wiring diagram.

Posted on Apr 18, 2009

  • 14036 Answers

SOURCE: low beams don't work. passenger high beam will

SOUND LIKE DIMMER SWITCH BAD.

Posted on Jun 13, 2010

Testimonial: "thanks for your help. turns out it was just bad bulbs. should have known better than buy cheap bulbs off the net.ruined my old set by taking them in and out of the harness. luckily new bulbs solved the problem.the advice was greatly appreciated though."

shastalaker7
  • 1515 Answers

SOURCE: Installed new low beam headlight and light will

Hi, if you have a meter to check the bulb, use it to check the wiring to the socket or wiring for power when light switch is turned on. You should have around 12 volts depending on year and type of truck or auto. If the old bulb was burned, you should have power there. When you turn on switch, the other side should work and you will know you have power and it may just be corroded. Check this and you should find the problem. Please keep me posted on this, I will be around to help you. Please rate me kindly if I have been of help to you.
Sincerely,
Shastalaker7

Posted on Jul 06, 2010

  • 977 Answers

SOURCE: Hello, The low beam on

it is most likely a blown fuse as the HIGH & LOW beam lights may have separate fuses, check the fuses in the fuse box under the hood or under the dash...... hope this helps......cheers.

Posted on Sep 22, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Change the headlight bulb in a 2004 durango


There are two methods. 1.) It is possible to maneuver your hand to the lock ring on each headlight assemble from inside the engine compartment. You must work "blind" -- by feel only. The lock ring rotates 1/4 turn to unlock. On the side of the engine with the battery, you must remove the front portion of the plastic battery box. 2.) This method is much easier. Three bolts (one at the top, two on the bottom) that hold the headlight assembly to the vehicle. Look directly at theheadlight, and look in the gap between the top of the headlight and the vehicle fender, and also at the gap between the bottom of the headlight and the vehicle bumper. With the aid of a light, you should be able to see all three bolts. Using a socket and an extension to your ratchet, remove the bolts, pull out the headlight assembly, and remove the lock ring. TAKE CARE TO HANDLE THE HEADLIGHT ASSEMBLY GENTLY so as to not alter the setting of the headlight in respect to the headlight frame. By taking care, it will not be necessary to have the headlight(s) adjusted.

on Mar 17, 2010 | Dodge Durango Cars & Trucks

1 Answer

My main headlight flashes when I put my off side indicator on please help if you can?


Check the headlight grounds, even if they are tight turn the screw holding them to the inner fender near headlight a little to dislodge corrosion. Also check the headlight connectors (including at the head light bulbs) for signs of heat damage, you can smell burnt plastic and the brass connectors will be discolored.

Apr 29, 2016 | Cars & Trucks

1 Answer

Runs rough when it's warm. comes and goes. has a 2.7. and then a 99 dodge carvan with a 3.3 does the same thing.


Chrysler Sebring Questions - Car running very rough ...

www.cargurus.com > Questions > Chrysler > Sebring

CarGurusMar 27, 2011 - It seems after car gets to a certain temperature it runs very rough. ... 2011 at 12:16 PM about the 1998 Chrysler Sebring 2 Dr LXi Coupe ... it.one day it washot out and it was running sluggish with rough idle.and ... I changed the altnator and battery its runs like its brand-new.now ... 2002 Chrysler Sebring LXi.

Chrysler Sebring Questions - Engine Power Loss After Car ...

www.cargurus.com > Questions > Chrysler > Sebring

CarGurusNov 3, 2011 - Engine Power Loss After Car Is Warmed Up - Major loss of power after car has ... When vehicle is cold runs ok, sometimes a little rough but not bad. Full power. Allowed vehicle to run for over 45 minutes last night at idle, died on its own, car sat approximately 20-30 minutes. ... 2002 Chrysler Sebring LX.

* Chrysler Sebring/200 Convertible Club * • View topic - Rough ...

www.sebringclub.net/board/viewtopic.php?p=69097

Dec 29, 2006 - 5 posts - ‎3 authors
However, the vehicle still suffers from rough idle under certain conditions: ... been resolved (I don't think he noticed that it happened only when warm though). .... The test will tell you its general condition without having to dig it out of the fender, ..... Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group rough ...
15 posts
May 24, 2010
Low idle rpm
15 posts
Mar 8, 2007
More results from www.sebringclub.net

Jan 01, 2016 | 2002 Chrysler Sebring

1 Answer

How to fix headlight on Chrysler Sebring


you could have the wrong bulb..could be bad connection...turn light on dim..take bulb from other side..and try it that way..before going any futher...

Nov 08, 2014 | 2007 Chrysler Sebring Sedan

1 Answer

Remove and replace bumper/driver fender on a 95 aurora


you can get the parts at the junk yard and you can do it yourself. just hope that the chassis is not bent

Apr 11, 2014 | Oldsmobile Cars & Trucks

2 Answers

How do i get to my low beams on my chrysler 2005 sebring sedan i got to the high beams perfect but the low beams right next to it has a metal barrier surrounding it which makes it impossible


Unfortunately, the answer I have is not a happy one =(. My wife has a 2005. In order to replace the bulb you will have to pull the Crutons (plastic push pins) that hold the front bumber cover on, remove the Headlight housing & replace the bulb that way. Shame on Chrysler for making it so difficult, in my opinion. But I hope this helps you to change the bulb =)

Aug 26, 2011 | 2004 Chrysler Sebring

1 Answer

I have a 1998 chevy cavalier. i had gotten ino a minor fender bender and busted the passenger headlight. i replaced the headlight and bulbs. now i have dim lights on the damaged side while all is well on...


Check the ground wire from the light socket. It should be black and trace back to the body or frame. Make sure it didn't get damaged and is making good contact to the car. You want shiny bare metal to metal. Hope this helps.

Mar 22, 2011 | Chevrolet Cavalier Cars & Trucks

Not finding what you are looking for?
2007 Chrysler Sebring Sedan Logo

519 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

79123 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...