Question about 1999 Chevrolet Suburban
Search google for a u/n and p/w to a site called ebsco.com. They have all the service manuals for vehicles, you can look up the removal procedure there.
Posted on Nov 09, 2014
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Door Panel removal
remove all visable screws from panel and arm rest. Arm rest should come off. Use a flat thin tool or piece of metal and slip it between the panel and the metal door frame. Slip it in about 2 inches,. Slide it back or forth til you hit a stop. That should be a plastic pop in.twist metal tool to pull panel away from the door. It should pop away from door frame. Don't overdo it if it doesn't come out. try another spot. once you get one loose, you can tell how to get the others out. Once panel is loose push it upwards to get top lip out of window bottom. If it has power windows,disconnect plug. If it has manual windows, you will have to remove the window crank There is a snap ring behind window crank that has to be removed.push in on panel by window crank and you can see the ring.
Posted on Dec 06, 2008
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Posted on Aug 14, 2009
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Posted on Aug 14, 2009
Hello, I can help you with this.
Look toward the front bottom and remove that screw, then there is one at the armrest, then if you have manual windows use a hooked tool or a special door handle removal tool to release the retaining clip on the inside of the crank handle. With power windows, use a small screwdriver and carefully pry up on the switch assembly and unplug the connectors. remove that triangle shaped plastic piece at the top of the door trim, it just comes straight out, ( use a small screwdriver or putty knife to gently pry it out from the edge ) , once you are sure you have found all the screws, start at the bottom of the panel and pry it out, when the fasteners are out lift the panel up.
Posted on Mar 26, 2010
My 98 Burb door handle just broke off - after being 'difficult to open' for a couple weeks. I guess this is common for that type. Order a new one online - I just did. They're cheap (under $20). Then you'll have it on hand when it breaks off. There will be one rivet to drill out to replace the assembly.
Posted on Apr 13, 2010
Tips for a great answer:
Feb 08, 2016 | GMC Cars & Trucks
Oct 10, 2013 | Cars & Trucks
Feb 09, 2012 | 1999 Chrysler LHS
Jan 11, 2011 | 1999 GMC Suburban
Jun 08, 2010 | 1998 Chevrolet Suburban
Apr 06, 2010 | 1999 Chevrolet Suburban
Jan 17, 2010 | 1993 Ford Explorer Limited
Dec 24, 2009 | 1995 Chevrolet Lumina
Apr 11, 2009 | 1998 Chevrolet K1500
Nov 12, 2008 | 1999 GMC Suburban
78 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: