Question about Cars & Trucks
Hyundai makes a very good, low problem car. They don't seem to have any issues that other cars don't, and with proper maintenance, should easily get over 350,000 km. Timing belts and water pumps are common as well as basic maintenance items like oil changes and brake pads. Good luck!
Posted on Nov 08, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Go to hyundaiusa.com and then click on OWNERS on their menu bar. Then create a new account for your specific Hyundai vehicle year and model. Once you successfully log into your account, under the My Vehicle page you should see an underlined link labeled "Owners Manual". Clicking on this link, you will then be able to download a complete PDF version of the original owners manual.
Posted on Apr 27, 2009
Recently purchased a hyundai accent with no owners manual.i am a mew driver,where can i get 2001 hyundai accent owners manual
Posted on May 01, 2009
A slightly better set of instructions might help you. Mine is a 2003 Accent. You have to remove the access panel that covers the lamps and the wiper control. Remove the phillips screws along the bottom of the panel (closest to the floor of the trunk when the lid is closed). Then remove the two screws that hold the brackets onto which the two strings are linked which are used to raise the rear deck slightly when the trunk opens. Next, there is a small cover underneath the rear wiper (about 2 inches square) that you need to carefully pry off using a small flat head screw driver via the indents on the lower side of the plastic cover. Inside you will find a 10mm bolt; use a ratchet to remove the bolt. Next, using a small flat head screw driver, carefully pry the middle section of moulding between the panel you are removing and the molding that covers the top portion of the back glass. There are two clips at the base of each middle moulding piece closest to the panel you are removing. Once those pop free, grab the panel at the bottom and firmly but gently pull away from the car body to pop free the two retaining clips holding the moulding to the car body. Finally, use one hand to grasp the panel from the bottom and the other to help help slide the panel "up" towards the glass (top of the car). The panel's top is flanged, and must slide up and away from the lip on which it sits. With the panel removed, grasp the white socket that holds the bulb and with gentle pressure turn it counter clockwise about 40 degrees and then pull the socket out. The replacement bulb is a type 168. Reverse these instructions to assemble, making sure in the end to push all retaining clips back into place until you hear them "catch" and hold the panel firm;y against the car body so that you do not get vibration noise.
Posted on May 19, 2009
Tips for a great answer:
May 26, 2015 | Hyundai Cars & Trucks
Mar 31, 2015 | 2005 Hyundai Accent
Aug 17, 2013 | 2002 Hyundai Accent
Dec 28, 2012 | Cars & Trucks
May 05, 2011 | Hyundai Accent Cars & Trucks
Mar 17, 2011 | 2000 Hyundai Accent
Aug 02, 2010 | 2006 Hyundai Accent
Jun 28, 2010 | 2003 Hyundai Accent
205 people viewed this question
Usually answered in minutes!