Question about Cars & Trucks

3 Answers

What is a eGo Starter Kit?

Hey! I an using a vape pen but I want to know about the eGo strater kit as well. What is this actually?

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

An ego starter kit is nothing but a kit that comes for the people who are new to experience e-cigarettes and this provides them with all the necessary things that are required by them to get the very first experience about the e-cigarettes.
And after that they can get the different flavors from themselves and experience the all new taste of e juice that can not only help them stop smoking but also help them in getting the best option for themselves to get the best experience of vaping for them. You can even buy the starter kits from E Juice.

Posted on Dec 06, 2016

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Expert
  • 79 Answers

Ego E Cigarette Starting Kit

Order your ego e cig starter kit today & quit smoking. Anyone can afford our electronic cigarette starter kits! Order an ego e cig starter kit now and get upto 50% off!

Know more here:
eGo Cig Starter Kit

Posted on Oct 08, 2015

  • Level 1:

    An expert who has achieved level 1.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

An eGo starter kit is two complete vape pens including; two small tanks, two rechargeable batteries and a USB charger. There should be some atomizers in the package as well.
Flip the tank over, unscrew the bottom, dribble the e-liquid down the side of the tank being careful not to fill further than the middle tube. Screw the bottom back on, screw on to the battery then press the button to vape. When the vapor production drops off or it tastes funny change the coil in the bottom of the tank, should be a week or two.

Posted on Jan 05, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

What do you think about vaping and vaporizers?


There are numerous sites online that are giving information concerning vaping. These are specially made for those people who are currently looking for quality vaporizer at prices. To find out more please visit this website :http://weedinmypocket.com/best-cheap-vape-pens-for-wax-dry-herb-oil

Apr 22, 2017 | Cars & Trucks

4 Answers

Can you give me some advice for how to choose a good e-cig product?


contact your doctor for the correct advice on these products

Nov 13, 2015 | Cars & Trucks

1 Answer

Low oil pressure light comes on and engine won't turn over. Everything else works but no power going to starter. Wait about one hour and a half and it starts fine. Oil level is OK. Is there an oil...


Welcome to FIxYa.com





First thing to do is check the power to starter with a volt meter.

A. From the battery to starter positive cable check to see if you have continuity.

B. Check the voltage at starter. Red lead of tester to the positive connection and the black lead from meter to a good ground.

Results should be: A. continuity And B. !2 volts

If the results of the above or not what your results are then stop and write to me. If your results are as above continue on to the second test.

Second thing i need you to do is get a Hammer

Now do you know where the starter is ? OK (see diagram)

you will need someone to help you- have this person get in the truck key in ignition -- you go to starter hammer ready holler START ENGINE then tap on the starter with hammer. Will it start?

Now tap the solenoid . It is the little round container on top of starter tap that too. Will it start?

This is an easy way to see if the truck starts if so starter is bad.

leedavidian_37.png

Ok We have a service Bulletin on this model for no crank .


TSB 06-19-14

100206

NO CRANK: STARTER TERMINAL FATIGUE

FORD:

1997-2007 Crown Victoria

1997-2004 F-150 Heritage

1997-2006 Expedition

1998-2006 E-S e?es

1999-2006 F-Super Duty

2002-2007 Explorer

2004-2006 F-150

2007 Explorer Sport Trac

LINCOLN:

1998-2006 Navigator

2003-2005 Aviator

MERCURY:

1997-2007 Grand Marquis

2002-2007 Mountaineer

ISSUE

Some vehicles may exhibit a no crank condition due to an open circuit in the starter relay

to starter motor circuit at the starter motor connection.

ACTION

Follow the Service Procedure steps to correct the condition.

SERVICE PROCEDURE

A new starter terminal wiring pigtail kit is released eliminating the need to replace the

entire harness for the terminal connection.

NOTE

TERI?INAL Kit ONLY SERVICES THE STARTER RELAY TO STARTER MOTOR

CIRCUIT. THE KIT DOES NOT SERVICE STARTER MOTOR BAHERY POWER

Circuit.

Refer to instruction sheet contained in Wiring Pigtail Kit for wiring harness service

procedure.

NOTE

REFERENCE THE APPROPRIATE WORKSHOP MANUAL SERVICE SECTION 303-06

FOR REMOVAL AND INSTALLATION OF THE STARTER MOTOR WIRING

TER1•fiNAL CONNECTION PROCEDURES.

Image

Parts Block

WARRANTY STATUS: Eligible under Provisions of New Vehicle Limited Warranty

Coverage

OPERATION DESCRIPTION TII?

06l9l4A Install Wiring Pigtail kit (Do 0.4 Hr.

Not Use With 14200A)

MT061914 Claim Additional Labor Actual

Required As Actual Time

Or Use SLTS Operation If

Available

DEALER CODING

CONDITION

BASIC PART NO. CODE

14A280 01

Disclaimer



leedavidian_38.png

Thank you for using FixYa.com

Regards, Lee Davidian

Nov 07, 2010 | 2003 Lincoln Navigator

1 Answer

1500 truck starter new flywheel new still makes a grinding noise also tried shimes still the same


You are moving the strater away from the flywheel when you put shims on it, this normally will make it worse. A clang will tel you its too close. When you got your starter shims did it come with a little piece of wire about the size in diamiter of a ink pen refill? if so that is the gauge for using the shims.You place it on the shaft of the starter, and it should just slide between the flywheel and the shaft. You may need to move the starter closer to the flywheel, this can be accomplished by only shiming the outside bolt on the starter- hope this helps.

Sep 04, 2009 | 1999 Chevrolet K1500

1 Answer

1993 eagle medallion strater problems


Explain your meaning of:

won't turn over and start.
Can you hear the starter motor running but the engine is not physically cranking the engine as opposed to the engine actually starting up and running ?.

Or dose the starter just make a grinding noise and is not moving the engine ?

May 14, 2008 | 2000 Eagle Medallion

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

235 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...