Question about 2005 Audi A6 3.2
Check fuse able link it's the smaller wire on the battery leading in side the cabin.
Posted on Nov 08, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It's probably your brake check switch going bad, it's under the driver's side dash above the brake pedal. I had the same problem and eventually my cruise control and brake lights stopped working when it failed completely. This is also a redesigned part that you can get from the dealer for about $8, which to me indicates they new the part caused problems and failed to notify owners. Try that before Audit tries telling you wires are faulty.
Posted on Mar 12, 2009
I think I can help you. I just did this on mine yesterday because my clock runs a few minutes fast each month. It was somewhere bizarre - sorry I'm not near the car to be more clear. I think I picked Sound, Settings and for some odd reason, it was there, rather than in Car, Settings. NOOO - it was in Tuning - click the AM/FM button, then Settings. I've only had it for a few months, but you'd think I'd have that one figured out due to re-setting it.
Posted on May 07, 2009
I had a problem with rear left side signal brake and reversing lamps not working on my 2007 A6 2.L Tdi SE.( Intermittent fault for 2 months)
I think I have identified the problem.
The seal between the Lens and the bulb plate had allowed moisture into the lamp.
During sunny days the water evaporates and enters the multi pin connector at the rear of the lamp.
On close examination of the connector I noticed minor discolouring of the ground ( Heavy Brown Wire connector Causing intermitting lamp failure )
I expelled all moisture from the lamp and multi-pin connector.
I removed the neoprene seal from the lamp and refitted it good side up
I cleaned the ground pin on the connector with 600 grade paper and contact cleaner
I put a slight twist in this pin with long nose pliers so as to get better connection.
Lamp is working fine since.
Changing the bulb plate may also work
Great care must be taken when changing bulbs or this problem will reoccur
Posted on Mar 31, 2010
Tips for a great answer:
Apr 26, 2015 | 2001 Audi A6 2.7T
Nov 08, 2014 | Cars & Trucks
Jun 12, 2014 | Cars & Trucks
May 20, 2014 | Jeep Grand Cherokee Cars & Trucks
Oct 22, 2013 | 2000 Audi A6
Oct 13, 2012 | 1995 Audi A6
Jun 04, 2012 | Audi A6 Cars & Trucks
Dec 04, 2010 | 2005 Audi A6
Nov 22, 2009 | 1997 Chevrolet S-10 Pickup
Sep 03, 2009 | 2000 Audi A6
Feb 02, 2013 | 2005 Audi A6 3.2
136 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: