Question about 1991 Dodge Ramcharger
It's losing one of two things - fuel or electricity. I would check and or replace the fuel pump and fuel filter first.
Posted on Nov 08, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Then i think i'd be dumping some soapy water on the intake gaskets checking for leaks. ANd wiggle the **** out of all vacuum hoses. ( you probably did that) And if there aren't any, your cam could be tired. You got a tough one there. Hard to figure with a keyboard.
Posted on May 17, 2009
SOURCE: 1991 Dodge Dynasty LE
Sounds like you are having a fuel problem with the fuel filter. If you have not had your car serviced in quite awhile i would do so. At least change the fuel filter and check the air filter as well. Hope thias will help you.
Posted on May 28, 2010
Sounds like a problem I had with my '85 Dodge D150 Ram Prospector. In my case, the automatic choke was broken and it was starved for air during acceleration because the choke was always closed. It ran fine at idle or very slow acceleration. I wired the choke open and it runs much better, although it is much more difficult to start as the fuel mix is lean due to the extra air. Once it gets warmed up, though, it runs fine. I hear that the barrel carb on mine often has problems.
Posted on Nov 29, 2010
Tips for a great answer:
Feb 04, 2016 | 1997 GMC Sierra
Nov 07, 2014 | Cars & Trucks
Jun 29, 2017 | Kia Sedona Cars & Trucks
Jan 22, 2010 | 1990 Dodge Ramcharger
Jul 02, 2009 | 1988 Dodge Ramcharger
Feb 05, 2009 | 1988 Dodge D-Series Pickups
May 02, 2017 | 1991 Dodge Ramcharger
May 03, 2017 | 1991 Dodge Ramcharger
203 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: