Question about Suzuki Liana
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
TO FIT A NEW MIRROR FIRST CONNECT THE WIRING PLUGS THEN ENSURE THE FRICTION PIN ON THE BACK OF MIRROR ENGAGES IN THE SLOT (OUTER EDGE OF MIRROR) PRESS FIRMLY AT THE CENTRE OF THE MIRROR TO ENGAGE THE RETAINING CLIP....IF YOU NEED TO REMOVE MIRROR INSERT A FLAT TOOL BEHIND THE LOWER EDGE AND LEVER IT FROM THE CLIPS.. HOPE I WAS OF SOME HELP TO YOU...
Posted on Feb 23, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you can remove the bolts securing the mirror to the door.
Posted on Sep 18, 2009
take off the plastic cover on the upper forward corner of the door, you will see three bolt studs with nuts..Remove the nuts, pull the mirror out enough to disconnect the electrical connector.
Posted on Sep 18, 2009
If you're lucky, on the inside of the door, will be a triangular panel
right behind the mirror that you can pop off. If you're not as lucky
and it's one piece or the panel is blocked by the door panel, you'll
need to remove the door panel to change it.
On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can remove the bolts holding the mirror onto the door
Posted on Nov 19, 2009
Tips for a great answer:
Sep 26, 2013 | Suzuki Swift Cars & Trucks
Dec 17, 2012 | 2008 Hyundai Getz 1.3
Oct 31, 2012 | 2005 Suzuki Liana 1.6
Jun 06, 2012 | Volkswagen Cars & Trucks
Jul 25, 2009 | Land Rover Freelander Cars & Trucks
Jun 30, 2009 | 2003 Toyota Corolla
Nov 20, 2008 | 2004 Audi A4
75 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: