Question about Cars & Trucks
I believe there are two sensors on this trans. You may need to change the other sensor. Ask your auto parts supplier. Good Luck Friend.
Posted on Nov 08, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2002 es 300 lexus
There is one before each catalytic converter (usually up right near the exhaust manifolds), and one after each cat (or if you have a Y-pipe exhaust that brings the two sides together to one pipe and one converter, then there's one after that single converter). Why do you want to change them? Have you gotten failure codes or are you having poor gas mileage? Or have they just been in there a long time? They're usually good for about 60k miles, although of course they can fail early. Usually the symptoms are poor fuel economy, running rich (seen by black smoke out the tailpipes and some rough idling, as well as blackened spark plugs), or fault codes dealing with system-lean or system-rich descriptions. Those symptoms are indicative of bad primary O2 sensors (the ones closest to the engine). If your secondary sensor(s) are failing (the post-cat sensor or sensors) you'll trip a check-engine light warning you of poor catalytic converter efficiency.
Posted on Sep 28, 2008
SOURCE: 92 lexus es300 knock sensor
Need to remove the upper and lower air intake manifold. There are two knock sensors for the front and rear pistons banks. If you plan to do this yourself it is about 1 to 2 hours. While you are at it, there is a short coolant bypass hose sitting in the same spot, replace it. Another problem with the knock sensor is the wire harness used to connect the two knock sensors into one connection sometimes wears out and contacts the metal on the engine causing false signals to the ECM, so replace this cable also.
Just did this last summer on my 99 ES300. Pretty easy.
Posted on Mar 16, 2009
according to the manual i have... it has three.... one in the exhaust manifold.... and two in the exhaust pipe..... slightly vauge on the exact location of the last two sensors... but looks like it is after the catylitic converter.
Posted on Apr 15, 2009
try changing the drive shaft speed sensor, sounds like you have a malfunctioning drive shaft speed sensor, change sensor and reset codes and test... e 300 had this problem in 94 and 95 even when they were close to new with very low miles... please rate my help , thanks
Posted on Aug 05, 2009
Tips for a great answer:
Nov 08, 2014 | 1994 Lexus Es 300
Aug 23, 2012 | 1994 Lexus Es 300
Oct 23, 2010 | 1994 Lexus Es 300
Sep 22, 2009 | 1994 Lexus Es 300
Aug 05, 2009 | 1994 Lexus Es 300
Mar 27, 2009 | 1994 Lexus Es 300
Feb 08, 2009 | 1994 Lexus Es 300
35 people viewed this question
Usually answered in minutes!