Question about Cars & Trucks

2 Answers

Mount safety belt stopper in a car

For safety belt in a car

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 3,961 Answers

Do you mean the button type?

http://www.ebay.com.au/itm/like/281275028072?limghlpsr=true&hlpv=2&ops=true&viphx=1&hlpht=true&lpid=107&chn=ps

You simply select a spot on the belt and squeeze the 2 halves together through the belt material, using a tool like a multigrips.

Or the gated buckle type?

http://www.ebay.com.au/itm/Gated-Buckle-Locking-Clip-for-car-Seat-Belt-BABY-CHILD-Restraint-instruct-NEW-/221593687108

Here you slide the belt into each gate from opposite directions

http://s660.photobucket.com/user/Cojones_2009/media/Auszookers/SANY0814.jpg.html

If threading 2 layers of belt do one first then the other.

Posted on Nov 08, 2014

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Expert
  • 51 Answers

I would strongly suggest not to mess with safety belts.

Posted on Nov 08, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi i have just changed steering wheel on fiesta zetec 2003 for a ST150 2005 steering wheel will the air bags and connections be compatable with each other.


. Were did you check for codes ? an what are you checking with ? you need a factory scan tool to check for those type codes ? or the light flashes codes
Lamp Fault Code (LFC)
When the RCM detects a fault, it will cause the air bag indicator to flash a coded sequence called a LFC. The code is one digit. The digit is indicated by a number of flashes with a 0.5 second interval between pulses. There is a 5 second pause between each display of an LFC.
Each LFC is flashed five times after which the air bag indicator will remain lit as long as the key remains in the RUN position. If there are multiple LFCs, each LFC will flash in order of priority.
Each LFC has one or more associated DTC.
  1. Press TRIGGER. The RCM will run the On-Demand Self-Test and display On-Demand DTCs (reflecting hard system concerns) on the screen.


Restraints Control Module (RCM) DTC Index DTC LFC LFC Priority Description Action - Continuous 1 Air bag warning indicator is illuminated continuously Go To Pinpoint Test B . B1231 Continuous 3 Longitudinal acceleration threshold exceeded (Crash Occurred) Go To Pinpoint Test C . B1318 Continuous 4 Battery voltage low REFER to Section 414-00 . B1342 Continuous 2 RCM is defective DIAGNOSE and REPAIR other DTC(s) that are present. CLEAR the DTCs. REPEAT the self test. When or if DTC B1342 alone is present, INSTALL a new RCM. REFER to Restraints Control Module (RCM) in this section. CLEAR the DTCs. REPEAT the self test. B1462 N/A N/A Safety belt switch circuit failure Go To Pinpoint Test AN . B1869 Continuous or Tone 39 Lamp air bag warning indicator circuit open Go To Pinpoint Test AJ . B1870 Tone 41 Lamp air bag warning indicator circuit short to battery Go To Pinpoint Test AK . B1876 4 24 Safety belt driver pretensioner circuit failure Go To Pinpoint Test T . B1877 4 23 Safety belt driver pretensioner circuit open Go To Pinpoint Test S . B1878 4 22 Safety belt driver pretensioner circuit short to battery Go To Pinpoint Test R . B1879 4 36 Safety belt driver pretensioner circuit short to ground Go To Pinpoint Test AF . B1880 4 27 Safety belt passenger pretensioner circuit failure Go To Pinpoint Test W . B1881 4 26 Safety belt passenger pretensioner circuit open Go To Pinpoint Test V . B1882 4 25 Safety belt passenger pretensioner circuit short to battery Go To Pinpoint Test U . B1883 4 38 Safety belt passenger pretensioner circuit short to ground Go To Pinpoint Test AH . B1885 4 37 Safety belt driver pretensioner circuit resistance low on squib Go To Pinpoint Test AG . B1886 4 39 Safety belt passenger pretensioner circuit resistance low on squib Go To Pinpoint Test AI . B1915 3 10 Air bag driver circuit failure Go To Pinpoint Test F . B1916 3 8 Air bag driver circuit short to battery Go To Pinpoint Test D . B1920 3 13 Air bag passenger circuit failure Go To Pinpoint Test I . B1925 3 11 Air bag passenger circuit short to battery Go To Pinpoint Test G . B1932 1 9 Air bag driver circuit open Go To Pinpoint Test E . B1933 2 12 Air bag passenger circuit open Go To Pinpoint Test H . B1934 1 29 Air bag driver inflator circuit resistance low on squib Go To Pinpoint Test Y . B1935 2 31 Air bag passenger inflator circuit resistance low on squib Go To Pinpoint Test AA . B1936 3 28 Air bag driver circuit short to ground Go To Pinpoint Test X . B1938 3 30 Air bag passenger circuit short to ground Go To Pinpoint Test Z . B1992 5 14 Driver side, side mount air bag circuit short to VBATT Go To Pinpoint Test J . B1993 5 32 Driver side, side mount air bag circuit short to ground Go To Pinpoint Test AB . B1994 5 15 Driver side, side mount air bag circuit open Go To Pinpoint Test K . B1995 5 33 Driver side, side mount air bag low resistance on squib Go To Pinpoint Test AC . B1996 6 17 Passenger side, side mount air bag circuit short to VBATT Go To Pinpoint Test M . B1997 6 34 Passenger side, side mount air bag circuit short to ground Go To Pinpoint Test AD . B1998 6 18 Passenger side, side mount air bag circuit open Go To Pinpoint Test N . B1999 6 35 Passenger side, side mount air bag low resistance on squib Go To Pinpoint Test AE . B2117 5 16 Driver side, side mount air bag low capacitance on squib Go To Pinpoint Test L . B2118 6 19 Passenger side, side mount air bag low capacitance on squib Go To Pinpoint Test O . B2141 5Hz 6 NVM configuration failure RECONFIGURE the RCM. REFER to Section 418-01 . B2226/ B2227/ B2855/ B2856 N/A N/A Front crash sensor failure Go To Pinpoint Test AR . B2228/ B2230/ B2232/ B2234 N/A N/A Air bag driver, 2nd stage fault Go To Pinpoint Test AL . B2229/ B2231/ B2233/ B2235 N/A N/A Air bag passenger, 2nd stage fault Go To Pinpoint Test AM . B2433/ B2434/ B2435 N/A N/A Buckle switch, driver failure Go To Pinpoint Test AO . B2437/ B2438/ B2439 N/A N/A Buckle switch, passenger failure Go To Pinpoint Test AP . B2477 Continuous 7 Module configuration failure Check for correct RCM for this vehicle. RECONFIGURE the RCM. REFER to Section 418-01 . B2853/ B2854/ B2873/ B2873/ U2027 5 20 Left side crash sensor internal fault/short to ground/VBATT/ID fault Go To Pinpoint Test P . B2852/ B2874/ B2875/ U2028 6 21 Right side crash sensor internal fault/short to ground/VBATT/ID fault Go To Pinpoint Test Q . C1947/ C1948/ C1982 N/A N/A Seat track position sensor, driver failure Go To Pinpoint Test AQ .

Oct 14, 2015 | Cars & Trucks

1 Answer

Replace the alternator in a 2007 jeep compass limited


First..,Get new part and also a new belt if belt has never been changed..Make sure part is correct,Use safety glasses..Be sure engine is cold..,Notice sticker under hood that shows belt routing diagram..If there isn't a sticker you can hand draw your own..Disconnect battery ground cable..Remove serpentine belt..If you have never replaced a serpentine belt it will get you confused but it is VERY EASY..It should have a diagram of how it is removed on the sticker showing the belt..The salesman at the parts store can show you easier than I can tell you..After removing belt ..,inspect all pulleys for tightness or any type of wobble..Look for any small shines of metal fragments around pulleys..Spin pulleys to make sure they don't have a worn bearing noise and they spin freely......If one seems damaged now is the time to replace it...remove wiring from alternator carefully..Remove alternator mounting bolts..Use a small pry bar or large flat screwdriver to pry the alternator carefully at both sides upward to remove it..It has a small bushing inside of the lower mounting holes which slides in and out to help keep alternator in position.The old alternator is to be turned in to parts store for a core credit so try not to damage it....Lube mounting holes of new alternator so it will slide into place smoothly..Install bolts and get them all hand tight then snug each bolt lightly until they are all seated then torque each bolt..Torque tight but DONT OVER TIGHTEN..It should be no more than 40lbs.torque..carefully connect alternator wiring..Install new belt..Doublecheck everything..,remove all tools from under hood..Coonect battery and start engine for safety check...

Feb 22, 2015 | 2007 Jeep Compass Limited

1 Answer

2005 audi A4 t motor mount problems car makes swishing sound on acceleration


Is your Fan hitting something? Or your Belts hitting?

Changing the Motor Mounts is not hard if you have the right tools. You can do it if you have the general tools, jack and safety stands.. Be careful

Apr 15, 2013 | 2005 Audi A4 1.9

1 Answer

Replace water pump 95 Nissan maxima


Remove the Old Water Pump
  • 1

    Place a drain pan underneath the radiator. When the engine is cool, drain the cooling system from the radiator into the pan.

  • 2

    Place a car jack underneath the oil pain to support it. Also, to protect the engine parts, put a block of wood onto the jack.

  • 3

    Disconnect the negative battery cable and remove the engine mount and bracket on the right side.

  • 4

    Take out the drive belts as well as the idler pulley bracket, the chain tensioner cover and the water pump cover.

  • 5

    Push the timing chain tensioner sleeve up and put a stopper pin in it to keep it from slipping. Take out the chain tensioner assembly.

  • 6

    Turn the crankshaft pulley in a backward motion until it rotates 20 degrees.

  • 7

    Place 2 MB bolts into the threaded holes of the pump and tighten them by hand, alternating turning a half turn each at a time unit they reach the timing chain rear case. Doing it this way will prevent damage to the timing chain rear case.

  • 8

    Remove the water pump, throwing away the old o-rings. Make sure not to let the water pump hit the timing chair.

Install the New Water Pump
  • 1

    Clean all the mounting surfaces on the water pump and covers.

  • 2

    Install the new water pump with the new o-rings, tightening the bolts to 75 to 95 inch pounds (8.5 to 10.7 Nm).

  • 3

    Turn the crankshaft pulley back to its starting position (20 degrees forward).

  • 4

    Install the chain tensioner and water pump covers, tightening to .092 to 130 inch pounds (2.3 to 3.3 mm).

  • 5

    Take out the stopper pin from the timing chain tensioner.

  • 6

    Put a bead of liquid sealant onto the mating surfaces of the water pump and timing chain tensioner.

  • 7

    Install the timing chain tensioner with the water pump to the engine block, tightening the bolts to 87 to 113 inch pounds.

  • 8

    Add the drive belts, the idler pulley bracket and the engine mounting bracket with the engine mount.

  • 9

    Reinstall the negative battery cable and remove the jack from under the engine. Install drain plugs to the cylinder block.

  • 10

    Start the car and check for leaks when the engine reaches normal operating temperature.

Continue to monitor for the next few days for air bubbles in the system causing the fluid level to go down. NEVER TOUCH A HOT ENGINE, CHECK WHEN ENGINE IS COOL.
Good luck! --My Car Doc

Oct 24, 2011 | 1995 Nissan Maxima

2 Answers

Need to know location of thermostate on 2.7 engine


2.7L Engine
  1. Disconnect negative cable from remote jumper terminal.
  2. Drain cooling system.
  3. Raise and safely support the vehicle.
  4. Remove the right front wheel and belt splash shield.
  5. Remove the accessory drive belts.
  6. Remove the lower alternator mounting bolt.
  7. Lower vehicle.
  8. Disconnect alternator electrical connectors.
  9. Disconnect AC clutch and AC pressure sensor electrical connectors. Reposition wiring harness.
  10. Remove the oil dipstick and tube. Plug hole in oil pan where dipstick tube mounts with water tight stopper.
    NOTE If hole for dipstick tube in oil pan is not plugged, coolant will enter oil pan. Serious engine damage can occur.
  11. Remove the remaining alternator mounting bolts. Remove alternator.
  12. Disconnect hoses at thermostat housing.
  13. Remove the thermostat housing bolts.
  14. Remove the thermostat and housing.


7a7208b.jpg

Fig. Air bleed valve (1) and thermostat housing (2) 2.7L-engine


Hope helps (remember rated and comment this).

Aug 06, 2010 | 2001 Chrysler Sebring

2 Answers

The brake lights wont shut off when i turn off the car. i have a pack of rubber stopper to replace the missing stopper which i found crumbled up on the floor but i dont know where the hole is to put the...


weird but try this. at the top of you brake pedal you see a switch that the brake pedal touches when in the unpressed position see if that stopper you are talking about mounts on the pedal arm .

Apr 25, 2010 | Hyundai Motor 1999 Tiburon

1 Answer

How to replace water pump


1. Drain coolant from engine.
2. Remove water pump drain plug. It is located on the front of the block just above the A/C compressor and about 2 o'clock of the crankshaft pulley.
3. Place a floor jack under engine (be sure to use a piece of wood in between jack and oil pan). Remove the right side engine mounting, mounting bracket and nuts.
4. Remove the drive belts and idler pulley bracket.
5. Remove the two black covers on the front of the engine. The one towards the radiator will have the water pump behind it and the one towards the thermo barrier will have the timing chain tenioner behind it.
6. Push in the tensioner sleeve, apply a stopper pin so it does not return ( a paper clip will work ).
7. Remove the tensioner (2 - 10mm bolts )
8. Remove the 3 water pump bolts.
9. Turn the crankshaft pulley approximately 20 degrees backwards to put slack in the chain to give clearance for the water pump.
10. Install the two M8 bolts into the threaded holes in the water pump (the upper hole and the lower hole)
11. Tighten the M8 bolts by turning half turn alternately until the water pump becomes loose. Lift up water pump and remove it. Make sure you move the timing chain away from the pump to remove it. Do not worry about engine timing. It will not effect it at all. The water pump is not part of timing the engine, nor will the chain losse contact with the crankshaft gear.
12. Make sure to use two new "O" rings on the water pump.
13. Install water pump and tighten bolts (63.4 - 85.1 inch pounds)
14. Return the crankshaft pulley to its original position by turning it 20 degrees forward.
15. Install timing chain tensioner, then remove the stopper pin ( paper clip)
16. Place sealer on the black covers and reinstall.
17. Reinstall engine mounting.
18. Reinstall drive belts.
19. Fill with new coolant.
20. Start engine and check for leaks. (Engine will be noise at first until the tensioner fills with engine oil. This is normal.)

Dec 10, 2009 | 1996 Nissan Maxima

1 Answer

I need to replace a rear seat belt in a 1997 Ford Tarsus. Does any know the best way to access the assembly? In addition, are there any diagrams available that show the connection points?


please don't forget to rate, thx.

Retractor and Tongue—Sedan
SPECIAL SERVICE TOOL(S) REQUIRED Description Tool Number Safety Belt Bolt Bit T77L-2100A
NOTE: Safety Belt Bolt Bit T77L-2100-A should be used for safety belt removal and installation.

Removal
  1. Remove rear seat cushion. Refer to Section 01-10 .
Seat Cushion, Rear Sedan
Removal
  1. Apply knee pressure to lower front portion of the rear seat cushion. Push rearward to disengage rear seat cushion pad and frame (600A88) from rear seat cushion front retainers (63370).
  1. Remove rear seat cushion from vehicle.
  1. Remove rear seat back. Refer to Section 01-10 .
Seat Back, Rear 60/40 Split Bench—Sedan
Removal
  1. NOTE: Safety belt bolts do not secure seat back to vehicle.

    Remove rear seat cushion as described.
  1. Fold down back seat and remove two bolts in the center of each seat back striker plates.
  1. Remove two bolts from outboard rear seat back frame retaining brackets.
  1. Lift seat back up and pull forward to remove from vehicle.
  1. Remove panel (52018) and quarter trim panel (31012). Refer to Section 01-05 .
Trim Panel, Quarter—Sedan Removal
  1. Remove rear seat. Refer to Section 01-10 .
  1. Pull up on rear section of rear door scuff plate that overlaps lower quarter trim panel.
  1. Pull lower quarter trim panel away from body.
  1. Remove safety belt retaining bolt.
  1. Feed safety belt through lower quarter trim panel.
  1. Remove safety belt anchor plate-to-sill bolt from quarter panel.
  1. Remove retractor anchor nut and retractor from rear quarter panel.
  1. Remove upper seat belt anchor bolt and anchor from upper rear quarter panel.
  1. Slide anchor plate end of safety belt through the openings in the quarter trim panel.
  1. Remove outboard front safety belt retractor and tongue (611B08) from the vehicle.


    2a6fac0.gif


    Item Part Number Description 1 386277-S190 Bolt (Part of 611B68) 2 31012 Upper Rear Quarter Trim Panel 3 611B60 Retractor and Tongue 4 N800937-S190 Nut 5 389370-S190 Bolt 6 — Rear Quarter Panel (Part of Body) 7 52018 Lower Rear Quarter Trim Panel 8 — Mounting Stud (Part of Body)
  1. Remove seat belt anchor bolt and retractor and tongue from rear deck panel.


    fff90b0.gif

Installation
  1. To install, reverse Removal procedure.
  1. Make sure the safety belt webbing is not twisted. If it is, remove the twist.
  1. Tighten retractor anchor bolt and safety belt anchor plate-to-sill bolt to 34-46 Nm (25-33 lb-ft).
  1. Check the restraint system for proper operation.

Jun 30, 2009 | 1997 Ford Taurus

2 Answers

Squeak from front left wheel...


It could probabely be the brake pads ,some cars have worning light come on and others have this little projection of steel piece working as warning tht the pads needs replacement.
Remove the front wheel andyou will be able to see the brake calipers and the pads.
Good luck.

May 10, 2009 | 1993 Honda Prelude

1 Answer

My passenger door hadle was pulled off when I pulled it to open it. I am trying to find a manual that explains to me how to change it. Can anyone point me in the right direction??? It's a Hyundai Tiburon...


These are the procedures outlined in the shop manual (without pictures). If you want the pictures too, go to http://www.hmaservice.com/ and register (by Vehicle VIN). Then you can navigate through the service manuals to find the info you're looking for. (You'll also have access to wiring diagrams, service bulletins, etc.)

1. Remove the grip handle using a remover.
2. Remove the inside handle housing.
3. Remove the tweeter speaker using a remover.
4. Remove the mounting screws and remove the door trim panel.
Disconnect the wire connectors.
5. Remove the door grip handle mounting bracket, speaker and door trim seal.
6. Remove the door tooling hole cover.
7. Remove the door glass stopper catch.
8. Remove the door delta chassis.
9. Remove the glass stopper bolts, remove the window glass.
10. Remove the door side weather strip.
11. Loosen the mounting nuts and remove the regulator assembly.
12. Disconnect the cable, after loosening the inner handle mounting screw, push the inner handle toward the direction shown in the illustrationand remove it.
13. Remove the door outside belt.
14. Remove the door outside handle and key cylinder.
15. Remove the door latch assembly mounting screws and remove the door latch assembly.

May 03, 2009 | 2003 Hyundai Tiburon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...