Question about 2006 Hyundai Elantra
The break light switch is mostly found above the break pedal .and is held in place by two nuts one on the top and a lock nut on the bottom . Just remove the bottom nut and slide out of place .
Posted on Nov 07, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
First, disconnect the battery. Then the only part that needs to be removed to access the starter is the rubber air plenum boot between the throttle body and the air filter housing. This allows enough room to get an arm in there to access the 14mm bolts that attach the starter to the transmission. After removing the bolts, the starter can be removed from underneath the car. lower it down as much as possible, and unbolt the power cable. You may have to twist and turn it a bit to get around the support between the engine block and intake manifold, but it will come out.
Posted on Feb 07, 2010
P2626 O2 Sensor Pumping Current Trim Circuit/Open (Bank 1 Sensor 1)
I'll sure this has to do with a faulty O2 sensor. This sensor is usually located around the header of your car, or down more on your exhaust.
Try disconnecting your battery for 30 mins, hook it back up, and start your car again. This will erase the error. See if it comes in again.
Hope this help (remember rated this post).
Posted on Mar 25, 2010
Tips for a great answer:
Dec 01, 2015 | Cars & Trucks
Jul 27, 2014 | 2006 Hyundai Elantra
Oct 01, 2011 | 2001 Hyundai Elantra
Sep 05, 2011 | 2008 Hyundai Elantra
Mar 03, 2011 | 2004 Hyundai Elantra
Dec 22, 2010 | Hyundai Elantra Cars & Trucks
Jul 08, 2010 | 2006 Hyundai Elantra
Apr 27, 2010 | 2006 Hyundai Sonata
May 04, 2009 | 2001 Hyundai Elantra
78 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: