Question about 2007 Chevrolet Impala

1 Answer

How to remove power seat switch from a 2007 impalla

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 2,044 Answers

They are screwed into place and then has an Electrical Connection and that is it.

Posted on Nov 07, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 impalla power seat


Pull off the seat back cover and look for the problem.

Mar 23, 2017 | 2007 Chevrolet Impala

1 Answer

How can I return a 2007 Kia Optima power seat back rest to position if the swich isn't working?


You can try jumping the seat motors with a power probe at the connectors under the seat. But you would need a wire diagram to know what you are jumping. You could also jump the switch but again you would need the diagram. if you don't know what to jump serious damage could occur.

May 19, 2014 | 2007 Kia Optima

1 Answer

3rd Row Seat will not power


if there was a shoe stuck and you try to prees the swith more than once so it was stuck and you was trying to force it to go so that can cause a mechanical damage with the seat motor so you need to replace the motor with a new one

Nov 24, 2013 | 2007 Cadillac SRX

1 Answer

2007 mitsubishi eclipse driver seat stuck rearward, wont release


  • Search for one of the most common troubles in power seats: inspect the seat rails and the area under the seat with a flashlight and make sure there are no objects obstructing or preventing seat movement.

  • Inspect the fuse or circuit breaker if both front power seats fail to op

  • Turn on the ignition switch, but do not start the engine. Operate the power seat switch and listen for the motor running under the failed seat. If you do not hear any sound coming from the motor, lift the switch from the door panel or the side of the seat.
  • Check for incoming voltage at the switch using a test light. If there is no voltage, check the wiring between the switch and the fuse panel for an open or short.
  • Unplug the switch and test it for continuity using a multimeter. If there is no continuity, replace the switch.
  • Test the relay if your circuit has one between the switch and the failed motor. Operate the switch and make sure the relay is receiving voltage from the switch; also, test for outgoing voltage from the relay to the motor using a test light. Make sure the relay is properly grounded. Remove or move the seat to the side if possible for this test. If one of the voltages is not present, check that part of the wire for an open or short. If there is no outgoing voltage, test the relay for proper operation and replace it if necessary.
  • Check for incoming voltage at the failed motor or motors using a test light. If there is no incoming voltage, test the wire or wires for continuity between the motor and switch or relay, looking for an open or a short.
  • Unplug the failed motor and test it outside, connecting the motor to the battery using two jumper wires. If the motor still does not operate, replace it.
  • Inspect the drive assembly-transmission, gears and tracks-and make sure the mechanism is in good condition. Make repairs as necessary.

  • Aug 02, 2013 | 2007 Mitsubishi Eclipse

    1 Answer

    How do I replace a 2007 Toyota Avalon drivers side power seat switch w/o memory seat?


    First of all, air bag sensors are not under the seats, so don't worry. Next, the switch working at certain times means that perhaps you do not have to replace it. The cold switch contacts are slightly corroded from moisture condensing on them. When the car warms up, the contacts are "clean" and make good electric contact. Choose: live with a little inconvenience or start messing with the switch to clean off the electrical contacts inside with electrical contact cleaner which requires removing the switch and opening up its insides.

    Jan 23, 2013 | 2007 Toyota Avalon

    1 Answer

    The tilting switch on my power seat switch does not work on my 2007 GMC Sierra Classic SLT. All of the other seat adjustments work except for the tilt.


    It could be a faulty switch it won't be a blown fuse or wiring issue (its too protected). Most likely it is a faulty tilt motor in the underside of the seat frame. There are 3 seperate motors, and I have replaced all three at different times.

    Jan 27, 2011 | 2007 GMC Sierra Classic

    2 Answers

    Heated seats not working .Light is working and fuse has not blown


    If the light and the fuse are good then you probably have a open in one of the heated elements.You need to ohm the upper then the lower heater elements to see which one is bad.The connectors are under the seat.

    Nov 19, 2009 | 2006 Buick Lucerne

    1 Answer

    Bought 2007 Saturn Aura electric seats wont work


    Those electric seats have relays(for movement & heater element) and a sophisticated DPDT switch. Hooking up a 12volt supply won't work,,,not to mention 20amp 12volt power supply

    May 18, 2009 | 2007 Saturn Aura XR Sedan

    1 Answer

    Cannot get tran into gear


    check ur break pedal arm rest their is a switch also know as the break switch make shure its not falty when u press on the pedal the switch has to come out

    Mar 03, 2009 | 2007 Chevrolet Impala LS Sedan New Cars

    Not finding what you are looking for?
    2007 Chevrolet Impala Logo

    42 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    75807 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22133 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8172 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...