Question about Cars & Trucks

1 Answer

"Have 4 wire hanging from under the driver side blue, red not sure what they go to?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

The red is either the positive terminal for controlling the seat whichever way and other wire would be the negative. If you have electric seats it could be that at any rate write down the cars options and those wires will be the control wires or pover wires. You can take a needle and pierce the insulation so it makes contact with the wire. Now connect a multimeter to them + to + and - to -. Now, watch the meter and see if the numbers vary when you move the seat, change a seat control like heat whatever you wrote down ads options. That will tell you exactly what the wired control. Make sure the meter is set to reading dc voltage and not ac or ohms.

Posted on Nov 07, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Polar start car starter


Check for a live skinned wire or tape wire,the wire had only be twist and taped(red should be battery wire)

May 04, 2014 | Cars & Trucks

1 Answer

Need ignition wiring diagram for 1996 ford 6 cyl truck


Here is what I have.
You are completing the circuit for the red lite blue wire.

fea4fae1-2eb4-44f8-85e4-6686ceee9d6e.gif

Jul 24, 2013 | Cars & Trucks

1 Answer

Have a 1994 Dodge Ram 1500 4x4 1500 with wiring problems. The original problem was a brake light out on the drivers side. I changed the tail light plugs. With head lights off I had brake lights with head...


Your truck may have had the factory trailer tow package, but that did not come with a wiring connector in that year. There should be a wire harness under the rear of the truck near the center of the bumper with 7 wires of the following colors/characteristics -

Red/Orange - +12V Battery (Thick Wire) From fuse #8 (40A)
Black/Orange - Tail Markers (Thick Wire)
Light Blue - Trailer Brakes (Thick Wire)
Violet/Black - Backup Lights (Thin Wire)
Dark Green/Red - Left Stop/Turn - (Thin Wire)
Brown/Red - Right Stop/Turn - (Thin Wire)
Black - Ground - (Thick Wire)



Under the dash, the brake controller wiring should be -

Red/Orange - +12V Battery (Thick Wire) From fuse #8 (40A)
Black/Orange - Ground - (Thick Wire)
Light Blue - Trailer Brakes (Thick Wire)
White/Tan - Brake Light sense - (Thin Wire)

Hope this helps.

Mar 19, 2013 | 1994 Dodge Ram

2 Answers

Where is the air conditioning charging valve located? Trying to charge AC


they should be on the back side of the engine torward the firewall under the hood or at the driver side front down along side the air cleaner box depending on witch motor you have they should have a red cap for the high side and a blue cap for low you charge on the low side .

May 12, 2011 | 2000 Pontiac Grand Am GT

1 Answer

I need to know what the six wires that are on one plugin goes to by the color of each seperate wire for the drivers side electric seat. The Colors are: Black, Red & Black, Yellow & Green, Yellow...


That connector is for the lumbar support in the seat. The wires are as follows:

Black - Ground, ends at left side under the dash.
Red and Black - Power to circuit fromk fusible link
Yellow and Green - Lumbar support, Push out
Red and Yellow - Lumbar support, Release in
Yellow and Blue - Side lumbar support, Spread out
Yellow, Should be Yellow and White- Side lumbar support, Close in

Hope this helps. Good Luck!

Apr 29, 2011 | 1994 Mitsubishi 3000GT

2 Answers

Electric trailer brake hookup


Truck Brake control

Red/Black stripe Black

Blue Blue

Lt. Blue/white stripe Red

White White

Orange Not used

Jun 28, 2009 | 2006 Toyota Tacoma

1 Answer

Trailer light problem


Check it with a test light. White-ground, Yellow-left turn, Green-right turn, Brown-tailights. Check it on the truck first. There are seperate fuses for just the trailer wiring in the fuse box under the hood. The Blue and Red wires are for Trailer brakes, don't worry about those.

Mar 14, 2009 | 2005 Chevrolet Silverado 1500 2WD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...