Question about Ford Falcon

1 Answer

Hi I recently bought a ford falcon 1996 XH GLI Longreach ute with extended tray When I put the air con on it's not cold and also a few minutes later the air was set to face blew up the windscreen and not face at all. Is there something I've bumped and don't realise that making the fan not blow towards face now. And also is there a way I can check myself if the gas needing refilling or if it has some in. So is there other reasons that it wouldn't be cold air

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 34 Answers

It can be several thinks like cooling fluid low, or thermostat open need to replacement ,

Posted on Nov 07, 2014

Testimonial: "Hi Paul, does the thermostat have something to do with the air conditioning being cold or not. Beause I am meaning the actual Air-Conditioner, not just the fan being warm. I would replace a thermostat fior the actual car overheatoing wouldn't I, I never heard of it being related to the air conditioner aswell, I though it was radiator. I was referring to thje air condtioner needing regassing, & the actual air ducts changing the dire tion they are blowing air out, all on their own"

  • Paul Musaelyants
    Paul Musaelyants Mar 14, 2015

    No thermostat have nothing to do with ac , u probably need some freon add to condenser or your ac compressor don't work!!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Ford Falcon auto Gli - car loses power and misses when accelerating


It is being happened for bad fuel filter. You can check it out. I have bought Ford since 5 years.
Source : Mechanic Shop Tempe

Nov 28, 2012 | Cars & Trucks

1 Answer

"99 ford tradesman ute longreach. Excessive fuel


cold start temperature sensor is my first suspect

Oct 31, 2010 | 1999 Ford Super Duty F 550

1 Answer

Falcon ute lights go dim at night and battery goes flat.


either your alternator is faulty or your battery is not holding charge
i would check the alternator and the battery and replace either or both

Jul 08, 2010 | Ford Futura Cars & Trucks

1 Answer

How do i stop the fuel running when changing a fuel filter? 1996 ford xh longreach. 4.0l v6


You can clamp it if it is a rubber tub. But if it's metal. fuel should only spill for about 30 seconds until the line is empty. Be careful! Have a mechanic do it if you don't feel comfortable doing it. Thanks for asking!

Jun 29, 2010 | 1996 Ford Aerostar Extended

1 Answer

I need to know how to tension the fan belt on a 1996 xh falcon ute 6 cylinder please can u help me


If this belt is not used with a tensioner, then you should adjust the belt so you can rotate the belt with your fingers 90 degresses.

May 09, 2009 | Ford Fairmont Cars & Trucks

2 Answers

Ford falcon 4.0 litre fuel injection, backfires when revved up. please send a diagram of the firing order. Also, the timing is out; owners manual suggest that timing can not be set manually


i have a 96 xh ford falcon 4.0 ute.I am rebuilding the engine and delated the pic i had of the timing set up . I am after a pic or a site that i can see where the timing marks should be. I know that the crank of cause is tdc.(key is on top) cam marker is at 3 o'clock (90 degrees from top). Where does the dizzy gear timing mark point to?

Apr 15, 2009 | 1983 Ford Fairmont

1 Answer

Fit brake discs and pads to ford falcon longreach ute


after removing the wheel, remove the 2 bolts on the brake caliper. place a clamp on the flexy brake line to stop fluid loss. remove the caliper then remove the pads. undo the bleed nipple and push the piston back into the caliper. do up the nipple. undo the front wheel bearings and remove the disk. pack the wheel bearings and fit the front hubs. fit the brake pads then the caliper. remove the clamp check the fluid levels and pump the brakes brakes should be done by a professional because if the fail you can only die once
happy motoring

Apr 04, 2009 | 1983 Ford Fairmont

1 Answer

Ford longreach with rough idle


a diagnostic computer check from your local ford dealer will sort that problem for you,the cost for that check should be around $50 and from then on whatever the problem wil cost you whatever your local dealer charges for labour or unless of course you are able to do it yourself which is cheaper in the long run,hope that helps,,goodluck.

Nov 26, 2008 | 2000 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...