Question about Cars & Trucks

1 Answer

MITSUBISHI VERADA 1999 Removed stereo and now the dash is completely blank, no clock, speedo or anything. Windows work while engine is on, but not when turned to accessory or off (usually gives you a minute or so to do windows up and close sunroof) interior lights don't work and the air on resets every time car is restarted. Any idea what this could be?? Help please :-/

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 3,679 Answers

I would think you may have dislodged a connector whilst doing the radio , retrace your work and make sure all connectors are firmly pushed together, also check fuses's , look for one that is called something like the 'dome' fuse , hope this helps although a bit obvious advice

Posted on Nov 07, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 Mitsubishi v6 Verada missing at idle.


Please about the diagnosis and repair of engine misfires here.

Oct 16, 2012 | Mitsubishi Cars & Trucks

1 Answer

CLICKING NOISE BEHIND GLOVEBOX 2000 MITSUBISHI VERADA


It's a little motor that i believe opens and shuts a damper to do with the climate control, a quick fix is just adjusting the cabin temp up a few notches.

May 31, 2010 | Mitsubishi Lancer Cars & Trucks

1 Answer

Need to remove dashboard instrument panel to replace bulbs on a 2000 w reg hyundi accent


there are screws in the black plastic trim around the clocks, remove these and pull the trim forward. then remove the screws securing the actual clocks into the dash, then pull the clocks gently forward.
on the rear are 2 plugs and the speedo connection, these will need disconnecting to completely remove the clocks.
once removed on the rear of the clocks are the bulbs , easily removed by twisting the holders anti clockwise.

to re install, do the above in reverse..
:-)

Mar 24, 2010 | 2000 Hyundai Accent

1 Answer

99 lancer,speedo tacho n gauge problem.


probably burnt or cracked circuit board on back of gauge cluster

Jun 21, 2009 | 2002 Mitsubishi Lancer

1 Answer

Red exclamation light has come up on dash - what does it mean


man this one was a challenge. however i did learn that this vehicle is autralian. pretty cool i might add. however the symbal is basically the same thing as a check engine light. took me 2 hours to find that answer for ya.

Apr 29, 2009 | Mitsubishi Passenger Cars & Trucks

2 Answers

Speed sensor not working how to change it where is it located


the speed sensor is located in the transmission near the prop shaft. has nothing to do with the clock. you may want to check the fuses first

Apr 16, 2009 | 1999 Mitsubishi Montero

1 Answer

My 1999 Mitsubishi Verada steering wheel is not as firm as when new, actually a bit loose, is there anyway to adjust it?


i recomend new tie rod ends or maybe even your rack and pinion.dont think its adjustable

Mar 14, 2009 | 1999 Mitsubishi Diamante

1 Answer

How do i remove the clocks on my 1998 mk4 golf?


There is a small trim between the steering wheel collum surround & the speedo clocks (the trim with the small piece of immitation leather material attached), this is only clipped in and can be removed with a flat screw driver, once this is removed you will be able to see two small torx headed screws at the bottom of the clocks, once you have removed these screws the speedo clocks will be free to pull out, once the clocks are free there should be two multi plugs on back of speedo, to remove this type of multi plug you have to push the purple lever on plug up & out, then you can completely remove the speedo head.

Feb 22, 2009 | 1998 Volkswagen Golf

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...