Question about Cars & Trucks
Have the OBD codes read , could be the coil pack but the codes will point you in the right direction
Posted on Nov 07, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It is not complicated, depending on what hands-on level of DIY on car. Here are what need to do, so you can estimate how easy or hard when you look through your engine. Drain all the coolant, remove the thermostat housing, remove the fan, belt. Remove the water pump pulley. There are 4 bolts to hold the water pump in place.If you think you can take them out and put them in without removing the AC compressor then you can do it. I did it twice without removing the AC. The pump was fine for the second time, but for leaking seal. At dealer, it is easier to access from the bottom since they have a lifter. But it is doable at home. Have fun if you decide to do it.
Posted on Oct 11, 2009
Hello. Your remote is 13 years old and most likely just worn out. Time for a new one! You can get it at a dealership; but they are much less costly on the internet. Just search your make, model, year and add key FOB. When you get it in the mail there will be instructions on how to program it so it will be customized to your vehicle. Joe
please rate my answer as very helpful. Thank you.
Posted on Apr 20, 2010
Mercedes makes it easy! Get a 10 quart oil pump and draw the oil out of the dipstick tube. The oil filter is on top so can be removed with a filter wrench and easily replaced. No need to jack the car up or crawel under. No fuss no mess and a 10 minute oil change!!!
Posted on Sep 20, 2010
SOURCE: crankshaft sensor Mercedes E320
i have mercedes 94 e320 was run ok .but after engine wash
first coil no sparking ,and a the second quit too ,running only whit the third coil ,,i changed all 3 coils but runnig a same,,no sparks on those front 2
Posted on Dec 14, 2010
Tips for a great answer:
Jun 12, 2014 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi
Jan 28, 2014 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi
Jul 07, 2012 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi
May 11, 2012 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi
Apr 30, 2010 | Mercedes-Benz E320 Cars & Trucks
Feb 09, 2010 | Mercedes-Benz E320 Cars & Trucks
18 people viewed this question
Usually answered in minutes!