Question about Cars & Trucks

1 Answer

What size stocket fit the nut on the alxe on 1998 88 olds

The size stocket need to take the nut off of the alxe of 1998 olds 88

Posted by on

Ad

1 Answer

36mm ---- I think--if not 35 or 34

You will need a 36" long or longer bar for that
or you will not get it off

I actually have a snap-on 3/4" ratchet head & 40''
bar, just for that

You can also use an impact gun,but I have seen
them not move the nut

On the install, your not going to have a torque wrench
that goes past 150 lbs. SO--you can not go to the max
there & you need at least 185 to 206

Just have to stop at 130 & go another 1/8 to 1/4 turn

Posted on Nov 07, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What size socket do i need to fit axle nut on a 2007 dodge caliber?


I told you already 22mm. It was a guess, but it was right!!

http://www.oreillyauto.com/site/c/search/Spindle!s!Axle+Nut/01232/C0362.oap?year=2007&make=Dodge&model=Caliber&vi=1433273

Dodge Caliber 2007, Front Spindle Nut by DormanĀ®. Thread Size: M22-1.5. Packaging Quantity: 5. Packaging Type: Box. Dorman's Spindle Nut is manufactured for high corrosion resistance and a long service life. Depending on the...Direct replacement for a proper fit every timeHigh quality steel construction more details on -
https://www.carid.com/2007-dodge-caliber-driveline-axles/dorman-spindle-nut-31531756.html


axle nut on 2007 dodge caliber Google Search

Jan 22, 2017 | Dodge Caliber Cars & Trucks

1 Answer

Any solution to fix my old alternators pulley to the new alternator


As long as the shaft size of the alternators is the same it doesn't matter what size nut that holds it on is.

Aug 16, 2016 | Cars & Trucks

1 Answer

1993 Geo metro 1ltr 3 cylinder engine need transmission bolt sizes


most are like 10 mm nut size and 14 wrench size , try on till it fits , most are about 2 inches lone what happened to the old ones ,

Nov 25, 2014 | 1993 Geo Metro

1 Answer

What do you have to take off to get the alxe out of a 1998 olds 88


Tire, Caliper and bracket, tie rod to spindle, lower strut bolts, remove brake caliper hose from bracket on strut, remove axle nut, Pull spindle away from strut, push axle out of hub, use pry bar and pop axle from Tranny. Make sure when you reinstall axle into tranny your careful not to rip tranny axle seal.Make sure it is fully seated also.

Nov 07, 2014 | Cars & Trucks

1 Answer

Need help getting the axle nut off of 2004 kia sorento nut won't budge


make sure you have a good brand breaker bar(lifetime warranty best), the proper sized socket(impact type), and either an old bumper jack that fits over the breaker bar or a 5 to 6 foot fence post. leave the whole vehicle on the ground, if you cant reach nut with wheel on, then have a helper stomp on the brakes firmly while you put breaker bar at nine oclock, slip jack or post over breaker bar and firmly add your weight and a friends to the end of bar pushing down until SOMETHING gives, hopefully its the nut. :)

Jun 20, 2010 | 2004 Kia Sorento

1 Answer

What wrench is needed to remove the 2002 GTI lug nuts?


they are the locking wheel nuts(lugs)and you will need a key(not a hex allen key)to remove them.if you look close you will see that the sides are not equal.
I use a nut spilitter or an old socket hammered onto the nut to remove it,means replacements but next time you buy a car check to make sure you have the radio code and the wheel nut key.

May 29, 2010 | 2002 Volkswagen GTI

2 Answers

How do I change tire on Audi A6? Tool doesn't seem to fit the lug nut size.


Just get the right tire range to fit the lug nut size. You
must replace your existing tire range. It's the only way.

Nov 10, 2009 | 2008 Audi A6

2 Answers

Waterpump


The easiest thing to do would be to measure the length of the studs in the old pump including the thickness of the flange,and take one of the old nuts back to the parts store. Get bolts the same length and sized to fit the nut. Use these instead. Makesure the holes in the new flange are threaded,if not get the bolts a little longer, the thickness of the nut.

Jul 05, 2009 | 1998 Jeep Cherokee

1 Answer

I own a 2002 jaguar x-type and i need to know the lug nut or wheel nut size


I believe the size is the measurement from any of the flat sides of the lug nut across to a flat side directly across from it. So to make it easy to measure, just remove one, and I assume it would be measured as metric. An easier way would be what size metric socket fits the lug nuts? That would be the nut size.

Dec 16, 2008 | 2005 Jaguar S-Type

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...