Question about 2005 Chrysler PT Cruiser

1 Answer

What could be some problems and solutions for my 2005 Chrysler PT Cruiser ? After starting engine and I turn on heater blower motor the engine start idling rough and almost stalls. Blower settings low to high make no difference. Soon as you turn blower off idles normal.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

Check idle speed control motor .idle air control

Posted on Nov 06, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The heater fan was working yesterday. As soon as I started the car this morning no heat coming out.


You'll need to check the blower motor for power and ground to know what to check first. Could be a fuse, relay, or other problem.

Feb 16, 2015 | 2002 Chrysler PT Cruiser

1 Answer

What could be some problems and solutions for my 2005 Chrysler P T Cruiser ? When after starting engine and turning on heater motor engine will start running rough and sometimes almost stalls. It make


You should know that the air conditioner compressor comes on when some of the heater functions work. That happens to remove the moisture from the air in the cabin so that you don't get foggy windows. The first thing that you need to check is air conditioner compressor. See if it is coming on. Then it could be the compressor, You can unhook the electrical connection to the clutch on the compressor to see if that is the problem. If not then it could be the body control module.

Nov 06, 2014 | 2005 Chrysler PT Cruiser

1 Answer

2005 PT Cruiser showing P0456 and P0522. Cranks but wont start.


The sensor that is most likely causeing the problem is the low oil pressure sensor. It is telling the cpu that you have a problem that unless you correct it, the motor will suffer serious damage from insufficient lubrication.Have the oil pressure checked with a manual gauge then replace the sensor unit if faulty.

Feb 23, 2013 | 2005 Chrysler PT Cruiser

1 Answer

Check engine light came on for about an hour then went back off..Tried to get it to come back on but couldn't ..Today the car would not start,engine just turned over let it sit for about 10 minutes and it...


To many things that can cause the issue your having. Drive to Auto Zone and they can scan your PT Cruiser free of charge and can give you the recommended solution to address any DTC codes that is retrieved.

Thank you for using fixya and post abck with your DTC codes.

Aug 24, 2010 | 2005 Chrysler PT Cruiser

1 Answer

'05 PT Cruiser O2 sensor problems.


I had a similar problem with my car. It turned out the O2 sensors were fine and the issue was a leak in the throttle body causing the engine to run lean. If you have an ODB2 scanner you can look at fuel trims, etc and will be able to tell.

Mar 28, 2010 | 2005 Chrysler PT Cruiser

1 Answer

When tun on the a/c to my 05 pt cruiser it doesnt


This is because the engine does not accelerate and the RPM falls below the minimum the PCM is in charge of sending a signal for the engine to increase the RPM.Thanks

Feb 27, 2010 | 2005 Chrysler PT Cruiser

1 Answer

Starting problem


there is always the instruction manual

Jan 19, 2009 | 2005 Chrysler PT Cruiser

1 Answer

Where is the crank sensor located on 2005 chrysler pt cruiser?


the crank sensor is located on back right side of engine by were the trans. bolts up.is the no start when could or hot?

Dec 13, 2008 | 2005 Chrysler PT Cruiser

Not finding what you are looking for?
2005 Chrysler PT Cruiser Logo

359 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...