Question about Cars & Trucks
Not shore what to takle ?
Could be the switch itself that is faulty. Not sure where yours is but could either be broken or not activating (being moved) when engaging reverse. Management light may not have anything to do with it, just a coincidence so treat them as 2 different problems.
Posted on Nov 06, 2014
You can take to an automotive electrical specialist or to the Ford dealer. You'll need to have the PCM scanned for diagnostic trouble codes to find out why the light is on. Most part stores have scanners for the PCM.
Posted on Nov 06, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It wouldn't be a fuse if that's the only light that's not working, I believe all of the parking lights are on the same fuse. It's most likely a bad ground or corrosion inside the socket where the bulb makes the electrical connection. So check the socket to make sure it has no corrosion, if it does, clean it up and apply some dielectric grease (available at any parts store) to prevent future corrosion, and check for a loose or broken ground wire.
Posted on Apr 13, 2009
dies the truck restart once it cools off? it is very common for th 6.0 to have high pressure oil issues on a hot soak. they will run till the cows come home but once shut off they can not build up enough pressure by cranking speed alone to start truck until it cools down and the seals become rigid enough to bridge the gaps they are sealing in the first please. if this is the case. it may be the STC fitting ojn the back of the high pressure oil pump (intake and turbos must be removed to check) or possibly the branch tube o rings have worn. the branch tubes are located under the valve covers and supply the fuel injectors the oil they need to perform their "power stroke"...
Posted on Jun 06, 2009
if the third brake light works you will probably need a brake on off switch. the fuse panels on that truck are under the dash near the steering column and under the hood in the power distribution box. both of these panels are identified in the owners manuel.
Posted on Jun 18, 2009
look up above your brake pedal and you will see the switch.. It will either between the firewall and the pedal arm (switch moves in when you brake).. Or it will be between the pedal arm and the dash (switch moves out when you brake)
Posted on Oct 08, 2009
Tips for a great answer:
Jul 06, 2011 | 2005 Ford Focus
Nov 28, 2010 | Ford Focus Cars & Trucks
May 10, 2010 | 2006 Ford Focus
Feb 22, 2010 | 2005 Ford Focus
Feb 12, 2010 | 2005 Ford Focus
Feb 07, 2010 | 2005 Ford Focus
Jun 15, 2009 | 2000 Ford Escort
May 20, 2009 | 2004 Ford Focus
Feb 26, 2009 | 2000 Ford Focus
35 people viewed this question
Usually answered in minutes!