Question about 2006 Toyota Sienna

1 Answer

How do I take off the arm rests of captains chairs in the second row of my 2006 sienna?

My kids keep fighting over the arm rests, one wants them up the other wants them down. I just want to remove them so its not an issue.

Posted by on

Ad

1 Answer

Wrong approach

The vehicle seats are not the problem

How about teaching the kids respect & discipline

I'm not spending 30 thousand dollars for some child to
argue over my seats,straighten them out or they will
get worse

Once you remove the arm rests,they will find something
else to do, just to work you to the breaking point

Posted on Nov 06, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cant get the footrest down into lock position, it is too hard.


No adjustments. What you can do is flip it over. extend the foot rest. See all those metal arms? they are all supposed to be straight and in line. I had a lot of kids, So I had to do this often. Till one of the arms broke.

Dec 26, 2016 | Cars & Trucks

1 Answer

How to remove/replace front door armrests on 2005 kia amanti?


look for small plugs (square- diamond shaped) in the arm rest. gently get these plugs out and there will be phillips head screws or bolts down the bottom of the holes . undo these and the arm rest will come off

Aug 16, 2014 | Cars & Trucks

1 Answer

Toyota arm rest on bucket seat removae.


In the down position try pushing real hard into the seat ( as if you were trying squeeze them together.) as you are pulling up on arm rest.

Jul 16, 2014 | 2002 Toyota Sienna

1 Answer

How do I remove door panel on 87 C4 Vette


to remove door trim you have to disconnect negative battery cable.then remove two screws attaching arm rest to door trim.remove arm rest it held in place by front and rear hooks that fit into slots in door trim.to release the hooks grasp the arm rest with both hands push it towards thr door pull up on the side of the arm rest facing door.remove four speaker grille mounting screws and the grille.then remove door trim panel screwss from bottom edge of the panel.remove the three remote control plate screws from the plate and the single screw in the rear edge of the door.then lift up on the door trim panel to release the molding from the top edge of the door then slide the panel forward to clear the latch release handle and down to clear the lock rod knob.if job look to difficult let a body shop fix.removing window door motor need tools to drill out rivets and reinstall rivots you need special tools to fix window motor and regulator.

Apr 14, 2013 | 1987 Chevrolet Corvette

1 Answer

I installed a new wiper motor. I ran it before installing the wiper arms. it will not stop at zero. it over travels down into the cowling. I try to rest them higher then they stop some where in the middle...


Try to run the motor without the wiper arms tightened down and turn it off so it can cycle down to its rest state. Then install the wiper arms.

Make sure, that the car's windshield wiper wiring is correct for this motor.
---
Wiper Arm & Blade Removal & Installation Front To Remove:
CAUTION
When the wipers are parked (off), the driver’s wiper arm must be above the passenger’s wiper arm.
  1. Remove the clip holding the outside end of the wiper arm cover to the arm.
  2. Lift the arm cap up to expose the nut.
  3. Remove the wiper arm mounting nut.
  4. Using a suitable two jaw puller, remove the wiper arm from the wiper pivot.
To Install:
  1. Verify that the wiper motor and linkage are in the parked position.
  2. Place the wiper arm in position over the wiper pivot.
  3. Install the nut to hold the wiper arm to the wiper pivot. Torque nut to 26 ft. lbs. (35 Nm). CAUTION
    Make sure to tighten the wiper arm nut properly.
  4. Push the arm cap cover down.
  5. Secure the clip holding the cover to the wiper arm.
Rear To Remove:
  1. Lift and hold the wiper arm away from the rear window.
  2. Lift the lock securing the wiper arm to the pivot.
  3. Slowly release the wiper arm so it rests against the lock.
  4. Remove the wiper arm from the pivot.
To Install:
  1. Install the wiper arm on the pivot.
  2. Pull the arm outward and release the lock.
  3. Gently release the wiper arm until it rests on the rear window.
prev.gif next.gif

Aug 22, 2010 | 1996 Dodge Grand Caravan

1 Answer

Trying to remove a door panel on 2003 deville


Look the door over real well looking for bolts and screws in the arm rest by taking to cover off the arm rest. The use a tool made for prying around the door panel popping out the snaps. Keep working around the door then you will probably see other areas where the door has some tapping screws or bolts. When everything is loose pull out door panel from the bottom and work it down pull it from the window frames.

Apr 15, 2010 | 2001 Cadillac DeVille

2 Answers

The arm rest does not move to a parallel position


Un zip the cover on the armrest and pull it up to expose the bolt hole. unbolt and remove the arm rest and see what parts are damaged, sometimes it can just be tightened.

Feb 12, 2010 | 1990 Ford Bronco

1 Answer

After replacing the wiper motor and linkage bushings on my Grand Voyager SE, the wiper arms stop in the straight up position when ''at rest''. Help please


Remove the arms,and place them back on where they need to go,do not turn the wipers on,do this as they set now.If the wiper blades when turned on go off the left side of the windshield ,then you will have to remove everything again,and move the wipers down in the rest position,and align everything up to the rest position,with the wipers at rest,and the motor at rest.

Jan 22, 2010 | 1992 Plymouth Grand Voyager

1 Answer

Window Switch Removal - The Drivers window switch has stopped working. How do I get the switch out to repair it or replace it? The window is currently stuck in the down position.


the arm rest containing the control, does come off seperate than the door panel. You will have to be careful when prying it off to avoid damaging the arm rest. There are tabs holding it in place.

It's a fairly simple job, the most aggravating part is pulling the arm rest to avoid bending it or damaging the external finish. Good luck!

Jul 28, 2009 | 2006 Ford F-150

1 Answer

Removing front headrest from 1995 bmw328i


howzit.

to do this you need to remove two plastic pins that hold it. it is a good idea to put the leaner s on the front seats right down and leaver it with a screw driver. why are you removing the arm rest? with the arm rest removed the centre console is going to look ugly

Oct 05, 2008 | 1997 BMW 328

Not finding what you are looking for?
2006 Toyota Sienna Logo

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...