My 2009 Acura trunk will no longer open with the remote or with the button on the side of the door. Not sure how to fix this and I don't want to have to bring it to the dealership
SOURCE: Remote car door opener got wet and won't work
Well first open it up completly. Remove the battery. Get a hair dryer and dry it out completly. Then let it stand for several hours to cool down. Make sure that the contacts where the battery fits are clean of any rust, or corrosion. Now install a new battery. It should work.
SOURCE: how to remove door panel on 1997 acura tl
Follow this link. There is detailed step-by-step info here
Please kindly let me know if it works for you
Good Luck
http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528008c18d
SOURCE: 2004 acura Tl cruise control wont engage
This is a problem you will to take to a shop, If you are mechanically inclined I can help you, but if not I would not mess with it, it could be the button or it could be the controller and could even just be a fuse, check the fuse and if you don't find the fuse blown then let me know if you have a volt meter and what to test this yourself. You are going to be working around the air bag too and if you probe the wrong wire while testing you could break your arm or leg by deploying the air bag by accident. Or your neck.
SOURCE: my key wont unlock the trunk anymore but the remote opener does.
There is a cable that runs from the key cylinder to the latch mechanism. There are clips that hold the cable housing in place, and if one of those comes loose then turning the key just moves the housing without releasing the latch. Check the clip closest to the latch. To get the trunk open drop the back seat, crawl in, and pull on the cable.
It is also possible that the cable is broken or damaged and needs to be replaced -- I assume you will then need to replace the enrite assembly.
SOURCE: How do I replace side view mirrors on a 05 Acura TL
replacement glass use wally have a plastic thing behind the glass so just prime out the old glass carefully with a screwdriver from the mount and it will pup out and the new glass just press it in place with your hands and you will hear a click and its in its place.simple as that.
1,694 views
Usually answered in minutes!
×