The cruise on my 1994 Camry works intermittently. When I set it, it works for about 5 50 10 minutes and then the cruise light flashes and cruise shuts down.
It is in the dash structure. See here p164 and onward for test and trouble procedures
http://www.turboninjas.com/camry/be.pdf
The Pcm/Ecm should control it.
Has this issue been professionally diagnosed? a failure in the module may not be the issue..... pull codes from cruise computer(this may be achieved by jumper wire at diag connecter near passengers strut tower_ cruise light on dash will flash two digit code combinations). is there an ABSlight on also? speed sensor original?
SOURCE: My cruise control won't work and my brake light is
Your brakes warning light or your actual brake lights? If it is your warning light that can come Monday if you're park break is on or slightly on or the switch that says that it is on is faulty, in which case it may tell your cruise control to turn off. If your brake lights stay on there's something pul to you about your switch by the pedal as your cruise will not work when you hit the bricks and this will be perceived as you hitting the brakes. A break warning light will also, come on if your brake fluid is low.
717 views
Usually answered in minutes!
×