My 1999 Honda accord will turnover, but will not start

SOURCE: 1999 Honda Accord Coupe

See an example
DISASSEMBLY 1. Remove the suction pipe and the O-ring from the oil pump.
2. Remove the rear cover with the gasket and pins. 3. Remove the cam ring. 4. Remove the rotor and vanes. 5. Remove the front side plate.
6. Remove the inner and outer O-ring. 7. Remove the spring. When assembling, use a new gasket and O-ring.
8. Remove the pulley nut with the spring washer. 9. Pull off the pulley and the woodruff key. 10. Remove the snap ring using snap ring pliers. 11. Drive out the pulley shaft with the bearing. If necessary, use plastic hammer

SOURCE: 1999 Honda accord dashboard clock light

use a eyeglass flat screww driver to pry the clock assembly up and out , disconnect the clock assembly and remove the bulb by twisting the the blue or sometimes grey round plastic bulb bottom to remove it from the assembly. install new bulb , twist clockwise to lock in place , reinstall assembly

SOURCE: # How to Turn Off the Maintenance Required Light

Use a narrow object(like tip of a pen) and push the 'red' build-in button around the instrument panel and the button will turn back to green and the maintenance required light will go off.

SOURCE: my 1999 honda accord will not start... no clicking

check the battery make shure it has a charge if it does check wiring to the starter

SOURCE: 1999 Honda Accord ac makes loud noise on med or high

So does mine,when you set the temperature you want the automatic temp control runs at high speed to either reduce or increase temp but should reach temp required within about 5 minutes.