SOURCE: Need to replace headlight assembly on 2005 Ford Escape
ithere are 4 bolts that hold it in...the top 2 are obvious..the others are behind the bumper. the bumper must be removed to acces them...here are the manuals instructions..
Item
Part Number
Description
1
—
Headlamp assembly bolts (3 required)
2
—
Headlamp assembly nut
3
13008
Headlamp assembly
4
14290
Electrical connectors
Removal and Installation
NOTE: Make sure the headlamp switch and the ignition switch are in the OFF position.
SOURCE: Need locations of o2 sensors in a 04 Ford Escape.
bank 1 sensor 1 is next to the fire wall. on the upper end of the exhaust
Testimonial: "Thank you for your help!!"
SOURCE: 2005 escape auto transmission maintenance
I had the defective cooler replaced yesterday and the Ford service manager told me there is no pan or filter in the 2008 escape, only a screen.
SOURCE: location of the bank 1 sensor 2 O2 sensor on a 2001 ford escape
B1 means the sensor is located on the same bank of the engine that has the #1 cylinder. B2 is located on the opposite bank.
S1 means the sensor is located BEFORE the catalytic converter
S2 means the sensor is located AFTER the catalytic converter
You didn't say which engine you have, so I've included the diagrams of both 4 cyl and 6 cyl so you can see the banks
SOURCE: 2005 ford escape 3.0l AWD XLT - DRIVESHAFT CARRIER
if there is some one in your area that balances driveshafts they can change just the bearing for you
105 views
Usually answered in minutes!
×