There is a pulley that appears to be not operating anything. This is an idler pulley, Attach a socket to the center of the pulley, when apply pressure it will turn releasing pressure on the belt, remove belt paying attention to the route. Replace belt as it came off. You will be fine.
i am interested in getting a mitsubishi legnum 1997 model would you recommend me buying this vehicle...
(More)
I AM INTERESTED IN GETTING A MITSUBISHI LEGNUM 1997 MODEL WOULD YOU RECOMMEND ME BUYING THIS VEHICLE
cylinder 4 not firing, catalytic converter glowing red, jittery lack of gas mileage, not...
(More)
cylinder 4 not firing, catalytic converter glowing red, jittery lack of gas mileage, not accelerating properly, check engine light flashing on and off. 2001 passat gls
after spending 880 dollors on having a head gasket water pump and radiator replaced in my 1998...
(More)
after spending 880 dollors on having a head gasket water pump and radiator replaced in my 1998 pontiac sunfire 2.2 liter it has no flow thru the brand new radiator engine runs supur hot 260 degrees in 2 miles both hoses to the radiator are extremly hot but the radiator is ice cold any ideas why it is still overheating ?