1996 Chrysler Sebring Logo

Related Topics:

Robbie Grove Posted on Oct 11, 2014

I have a 1996 1996 Chrysler Sebring Sebring and the timing marks line up but the distri

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Sep 16, 2008

SOURCE: Replacing headlight in 1996 Chrysler Sebring JXI

piece of cake....
take off the two "star" bolts, one toward the center of the engine above the light assembly and the other toward the fender (it is very long). when you remove them both the entier assembly falls off into your hands and makes changing the bulbs much easier.

Ad

Jonah Oneal

  • 14092 Answers
  • Posted on Jul 27, 2009

SOURCE: diagnostic Troubleshooting Codes for 1996 Chrysler Sebring Cvtble

FIRST YOU TURN IGNITION SWITCH ON WITH ENGINE OFF.LOOK AT MIL LIGHT IT SHOULD COME ON 3 SECONDS THEN GO OFF IT NOT THEN YOU GOT BURN OUT BULB OR A CIRCUIT PROBLEM.IF ALL IS WELL. ATTEMPT TO START ENGINE.TURN OFF IGNITION. WITH OUT STARTING ENGINE.TURN IGNITION ON OFF ON OFF AND WITHIN 5 SECONDS RECORD 2 DIGIT DIAGNOSTIC TROUBLE CODES.DISPLAYED BY FLASHING MIL LIGHT.YOUR MIL FLASHES WILL BE YOUR CODE LIKE THE MIL LIGHT FLASHES 5 TIMES THEN PAUSE FLASHES 3 TIMES THAT CODE 53 THAT YOUR CODE.IT LIKE MORSE CODE.WHEN DONE TURN OFF IGNITION SWITCH.GO TO AUTO ZONE OR ADVANCE AUTO GET HAYNES COMPUTER CODE BOOK. TO GET CODE MEANING OR WHAT SENSOR GONE BAD.HOPE THIS CAN BE SOME HELP.

Gene Johnson

  • 3 Answers
  • Posted on Jul 31, 2009

SOURCE: Can't find the timing marks on '97 Chrysler Sebring 2.5L V6

Crank mark is obvious but cam marks arent. There are two notches in the tin timing covers behind the cam gears. At about the 2 oclock positions

Testimonial: "Thanks! Turns out we busted the valves when we tried to turn her over, but this would have been great advice if I had asked before hand."

Patrick Rayome

  • 1757 Answers
  • Posted on Mar 08, 2010

SOURCE: I need a timing belt diagram for a 2005 chrysler sebring

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I have only been a free contributor to this site for the past 4-months.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.

If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!

Again my apologies...
http://www.2carpros.com/car_repair_information/year/2005/make/chrysler/model/sebring/2005_chrysler_sebring_timing_belt_diagram_marks.htm

Anonymous

  • 1297 Answers
  • Posted on Jun 03, 2010

SOURCE: need timing marks for a 2001 Chrysler Sebring with

if you find this helpful PLEASE leave a 4 thumbs up rating

5a9828e.gif

Sean

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

1996 Chrysler Sebring LXI 2.5, V6 engine. Where is my water pump located exactly.

Question edited for clarity.
Question moved to 'year make model' category.

It located under the timing belt cover and is the central pulley between the two camshaft sprockets. It is not a job for the faint of heart as keeping the cam sprockets locked on place is essential.

Diagram here

https://www.justanswer.com/chrysler/1vsyc-replace-water-pump-timing-belt-1996-chrysler.html

More here

https://www.google.com/search?q=1996+Chrysler+Sebring+LXI%2C+water+pump+location

..
0helpful
1answer

How do I bring my number one piston up to top dead center without the timing belt or drive belt on

What model, make and year??? Line up marks on balance wheel and timing mark. Rotor points to #1 on distri cap.
0helpful
2answers

How do i set the timing on a sebring 2002 engine

What, you want someone to write a 5 page personal manual for you on how to do it? Do you not have Google in your neighborhood?
0helpful
1answer

2002 chrysler sebring how to set correct time

The only way to set correct time is by putting the marks on the crank and cam gears in line with the marks on the timing housing or block. Other then that there is no way to adjust timing.
1helpful
1answer

Like to know where the timing mark for a 2006 chrysler sebring

Hi, here you are...
39900a5.gif Crankshaft and camshaft alignment marks-2.4L (VIN X) Engine


9f5c6e9.gif
Camshaft and crankshaft alignment marks-Chrysler 2.5L (VIN N) engine


acb6bd1.gif
Timing belt engine sprocket timing-2.5L (VIN H) engine
2helpful
2answers

How to replace distributor on a 2001 volkswagon cabrio

remove disturbutor cap mark where rotor is and mark position of dist, remove bolt holding dist, pull dist out. now install new one but make sure rotor ends up pointing in exact poistion as old and dist is postioned they same. good luck.
2helpful
1answer

1996 Sebring convertible locating low pressure port on the a/c? Where is it?

The smaller of the two lines is the high pressure line. The larger line is the low pressure line. The cap on the fitting should be blue in color on the low pressure side. Hope this helped and best wishes.
0helpful
1answer

96 sebring 2.5 sounds like ign timing is off

Sorry for the delay.

I am personally going back to answer your unanswered question. I do not know if you still need the answer, but I am going to answer it in case you still do.

You cannot correctly "Time" that engine using the old method of a Timing Light. You have to take the front of the engine (where the Pulleys are) OFF and take the Timing Cover Off inorder to gain access to the Timing Belt and Marks.

Click on the following direct Link. It has the Timing Belt/MARK(S) Diagrams that you will need, complete with Instructional and Directional Diagrams.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1996/make/chrysler/model/sebring/1996_chrysler_sebring_timing_belt_diagram_marks.htm
4helpful
1answer

Can't find the timing marks on '97 Chrysler Sebring 2.5L V6

Crank mark is obvious but cam marks arent. There are two notches in the tin timing covers behind the cam gears. At about the 2 oclock positions
Not finding what you are looking for?

180 views

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...