When do i change my timming belts on my 2008 ford ranger 4 cylender

SOURCE: 4 wheel drive

there is a way to do that.....all you have to do is go get the manual locking hubs and switch it over...not that hard....did it to a early 90s f150....pretty easy.

SOURCE: 2004 Ford F-150 extended cab FX4. 4WD problem

The malfunctioning part in my case is what ford calls the "integrated wheel end" which locs the weel hub on the four wheel drive in or out as need. Part is available from Ford and cost about $110.00. I will do this repair myself.

SOURCE: 2004 Ford F-150 extended cab FX4. 4WD problem

Your front hubs are automatic locking hubs, and the gears are hard nylon. These hubs break very easily, therefore causing you to lose your front wheel drive in 4 high, or 4 low. If you replace the hubs with "WARN (name brand) " manual locking hubs, you will never have the issue again. Of course, you will have to get out of the truck and manually lock the hubs, but they are metal gears, and much more durable. I've personally seen the issue several times, and changing the hubs has resolved the issue every time.

SOURCE: Need instruction to replace 2001 Ford Ranger Exterior dor handles

GO TO YOUR DEALER

Colin Stickland

• 22516 Answers
• Posted on Oct 30, 2009

SOURCE: How do I change right rear wheel bearing on my

is it front or rear wheel drive¿¿