SOURCE: brake lights/rear turn signals
I had the same problem with my 1999 Yukon. The electric board needed to be replaced. Rust starts to build up and shorts out or blows the bulb. The dealership charged $73.60 for the part and I installed it myself (Saved $30).
SOURCE: 1995 Pontiac Grand Am - fuses
check fuse in your fuse box if all the fuse are good you may have different problem
1- loose fuse
2- loose wire
3-electrical switch panel light is bad
SOURCE: front signal light not working and rear signal
Your front turn signal socket is shot. Buy a new one at the dealer for about 30.00. It will fix it. You may be able to clean it and wiggle it to get it to work. But it wont last very long. I had the same problem. Replaced the socket and it is fine. Note: If one side is bad the other side it not far behind. Probably 2 or 3 months it will go also. Good Luck.
Bill
SOURCE: left rear turn signal light on my 1999 chev. s10 is not working
any increase in bink speed is direcly related to a bulb being burt out.
SOURCE: turn signals blink fast (lights still work)? what
Hello. This happens when one of the bulbs is starting to go bad. pull all of the turn signal bulbs and look carefully at each one. you will find one with the filaments crossed. Replace that one. J.
107 views
Usually answered in minutes!
×