Reset reset the alarm and 1997 grand Cherokee

nice double post and as ANON
great , back up and read your first post for answers,

get into vehicle through passanger side, open hood, disconnect battery cables.this will stop alarm .

P0351 Ignition Coil (A) Cyl.1 Prim./Sec. Circ Malfunction 16735 is the vehicle missing if it isnt reset code if it comes back change plugs and wires

i have a 1997 jeep grand cherekee laredo and am having a problem with the alarm its a factory alarm it whent off and i cant get it to reset i tryed everything i could locking and unlocking the doors i put all new fuses and relays in i even unpluged top dash alarm sensor and body control module and it just dont want to reset and it dont want to run at all how can i take care of the problem

The VTSS (Vehicle Theft Security System) might be armed. To dissarm insert and rotate the key on the driver door lock or the passenger door lock or the liftgate door lock. You can also disarm it by pushing the button on the keyless control unit.

go to a stereo shop that does remote starts and talk to them if there any good they will know

If you cant start it because of the alarm disconnect the battery, wait ten secs, reconnect then turn the key in the driver's door twice holding for 2 seconds on the second turn, this should reset the alarm.

I have a 95 Grand Cherokee, its got this built-in 'kill switch' (lol) that i had to figure out - the alarm wouldn't stop going off until i put the key in the driver door, then turned it Right-Left-Right...

Your probably already aware of this nuisance, but i thought i'd post it it just in case.

i have a 95 jeep grand cherokee lerado from time to time my alarm goes off i dont have a remote 4 my alarm but i found out that if you put the key in the driver door and unlock it. it will reset the alarm!!!!!