Mine is a P 0032 and P 0038
upstream and downstream oxygen sensor heater voltages are too high, possible causes are
- bad o2 sensors
- shorted o2 wiring
- bad pcm
clear codes and determine if codes are hard(current)
if they are, unplug sensors, clear codes and re-scan to see if p0032 and p0038 appear.(there will be 2 to 4 other codes generated)if p0032 and p0038 are gone from the list, change both o2 sensors.
if p0032 and p0038 are still in the list, it is either wiring or pcm issue, use a meter to check for short from o2 connector to ground, with pcm unplugged..
Good luck, Rob
×