Question about 1990 Dodge Dynasty

1 Answer

When car is started i have no brakes

On a 1990 dodge dynasty i replaced master cyclinder and brake booster

Posted by on

  • Loei Yang May 11, 2010

    did you bleed all the brakes ?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 404 Answers

Sounds like theres a vacumn hose off your master cylinder

Posted on Jul 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 toyota tundra sr5 crew cab 4x4 losing brake fluid in the booster ? What do I replace there seems to be some kinda control valve maybe for the abs in between the master cyclinder and the brake booster...


Take Off Nuts That Hold Master Cylinder To Booster. Pull Master Cylinder Away From Booster--Do Not Damage Lines--Feel With Finger At Rear Of Master Cylinder For Fluid--If Found Replace Master Cylinder And Booster With Total Unit Combo For Better Warranty. DO NOT FOOT BLEED--Pressure Bleed Or Gravity Bleed Only.

Feb 19, 2015 | Toyota Cars & Trucks

1 Answer

How do I change the brake master cylinder on a 2000 dodge dakota rt 360 magnum 5.9l v8 mopar


disconnect the front and rear brake lines, undo bolts holding the master cylinder to the brake booster. Bench bleed the new master and reconnect to booster and reconnect lines. Be very careful when undoing the lines from the master cyclinder as you do not want to damage them. Soak with WD-40 before loosening. Once everything is back in place you will need to bleed all calipers and/or wheel cylinders. Again soak the bleeder screws beforehand with WD-40 as they break off easily.

Dec 12, 2014 | Cars & Trucks

2 Answers

Can you brake booster make you engine smoke


Sounds like some brake fluid has leaked down on your exhaust manifold and is smoking.

Apr 29, 2014 | 2002 Toyota Tundra

1 Answer

1988 dodge dakota brake problems


It's the master cylinder, Theresa. It will need replacing, because the internal seals are not holding against pressure.
It is not a job for just anybody, but somebody with some experience in bleeding the master cylinder and then bleeding the individual wheel brakes could do it. It's a procedure for getting all air out of the system after replacing parts.

Aug 01, 2013 | Cars & Trucks

1 Answer

Need to know how to replace brake booster in 1995 dodge intrepid


The brake booster should located directly behind the brake master cylinder. if it is you need to remove the brake master cylinder, do not remove any brake lines, there will be a vacuum line going into the booster, either from the front or the side, it's easy to spot, it's fairly large compared to other lines on you car. under the dash where the brake pedal is, you will need to remove the brake rod form the pedal tiself, as it will most likel be a solid part of the brake booster itself from the factory, then unbolt the booster from the firewall, 4 mounting bolts usually, all 4 might be in the engine compartment or 2 inside the car, 2 in the engine compartment. Before you start go to Auto Zone and look at a replacement booster, it will help you see what you're going to do when you start on you repair.

Oct 06, 2010 | 1995 Dodge Intrepid

1 Answer

Brake boosters


you can tell if the brake booster is bad, rearly it goes bad, your master cyclinder usually go out before your brake booster will. It feel spoon-gy and while pressing down on the brake peddle holding it down you can feel the pressure bleed off with no resistance. If the brake booster is bad you have only ONE shot for braking each time; its very dangerous. Did you bleed the brake lines to release the the air out of the system when you replace the pad? whom ever did your brakes should know to bleed it. having air in the line can be dangerous as brake will not function and operates properly and can cause an accident. If you did bleed the brakes and your booster is fine then you have a master cylinder problems. master cylinder gives you a spoon-gy feel and when braking the peddle it tend to go to the floor and you have to let your foot up to build the pressure and applied the brake again to make it stop. Master Cyclinder use or rebuilt will cost you 30.00 bucks and new will be 58.00 bucks and they are easy to replace. Just make sure you have plenty of extra brake fluid to bleed all 4 brake line..I recommend you reused the brake fluid when bleeding the unit saving some money than wasting the fluid, glass jar is the best for capturing the bleed fluid with automotive smallest vacum hoses you can purchase at any auto discount store 58 cent a foot, which you only need 2 foot. good luck I hope that help some.

Jul 10, 2009 | 1998 Chevrolet Cavalier

2 Answers

Brake Master Cylinder Push Rod Clearance


No Adjustment.Rod is made into booster,there's a short rod between master cyclinder and booster but not adjustable!!

May 10, 2009 | 1999 Saturn SL

1 Answer

93 dodge dynasty brake pedal stiff wont apply brakes


your power brake booster needs replaced ,it work off engine vacuum and when the seal inside leak there is no power assist for the brakes

Mar 06, 2009 | 1993 Dodge Dynasty

1 Answer

1989 dodge dynasty brakes


its possible the brake booster is bad its the vacuum canister on the firewall behind the master cylinder it basically gives you the power in your power brakes

Feb 01, 2009 | 1993 Dodge Dynasty

Not finding what you are looking for?
1990 Dodge Dynasty Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...