Question about 2003 Hyundai Accent

1 Answer

Trany problem My 2003 Accent lost reverse, the engine light is on and it revs at about 4000rpm when it is going 40km. is this a computer problem? Thank you, Richard

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 135 Answers

I would check the vacuum line to the modulator valve on the side of the transmission first. This will keep the transmission from upshifting, however that should not affect the reverse band. From your description, you are probably due for a reman transmission or overhaul.

Posted on Jul 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1998 hyundai elantra will not go in reverse...any ideas?


Hyundai Elantra transmission won t go into reverse m ...

www.fixya.com > ... > Cars & Trucks > Hyundai
Hyundai Elantra cars & trucks transmission won t go into reverse m ... Question about 1998 Elantra. 1 Answer · Reverse gear almost dead in 1998 Lantra auto.

99 accent wont go into reverse - Hyundai Forums : Hyundai Forum

www.hyundai-forums.com/...accent/157948-99-accent-wont-go-into-rev...

Mar 28, 2013 - 3 posts - ‎3 authors
Here is my situation and am hoping I might get somebody who can actually help me with this. I have a 99 hyundai accent automatic with ... 2001 Accent No Reverse
10 posts
Apr 10, 2011
1998 Hyundai Accent Automatic Trans Problem ...
10 posts
Dec 6, 2005
More results from www.hyundai-forums.com

Why is it having trouble moving in reverse?


Jan 05, 2016 | Hyundai Cars & Trucks

1 Answer

My 2003 Chrysler 300M 3.5L is seriously missing out. Thought it was bad gas(water). Won't rev up above 4000rpm while idling in Park. Intermittently, won't rev up above 2500rpm while driving. ...


Go to Autozone, Advance, etc.. any good parts store and OBII scan done (fault scan) they do this FREE. Scan will tell you what sensor(s) to go after to fix. Once you repair or replace sensor have parts store reset your light.

Mar 03, 2011 | 2003 Chrysler 300M

1 Answer

1.Can a flashing hold light/faulty mass air flow sensor burn the clutches in a transmission? 2.if vehicle reves out after changing into second gear and transmission is rebuilt and problem still persist...


The ecm would not cause this, it sounds like someone did a poor rebuild, if the engining is reving and the car doesnt what to go then the clutches may be bad, a mass are flow would not cause a trany to go bad, the flashing hold light is a problem but should not be happening after the trany was just rebuilt, something is not right here, the trany was just rebuilt and now the hold light flashes and the motor rev going into 2nd gear, that trany has problems a bad ecm wouuldnt cause this slipping reving problem you are having , i would have a trany shop check to see if that trany was really rebuit.

Jan 12, 2011 | 1998 Subaru Forester

1 Answer

My 2003 Pontiac Wont go in reverse when u put it in reverse...What could the problem be and How much can I estimate spending to fix it


This problem can be caused by two things low trany fluid or worn trany, warm engine and put car on level ground and check trany oil level, if the oil level is good then you may need a rebuild, this kinda job could run about $1,800.00 to $2,500.00 depending on where you live and what trany shop you go to. hope this is helpful.

Sep 13, 2010 | 2002 Pontiac Grand Am

2 Answers

When i back up or go forwad i heard a sound from all the ingenie like it is movning?


Hi,
Without seeing, it's hard to come up with a solution, but raise the hood and have someone (or yourself) look at the engine motor mounts when the car is put in forward or reverse. You may have a broken motor mount.
Hope this helps... Good luck!

Jul 09, 2010 | 2003 Ford Focus

1 Answer

I have a 2000 golf 2.0 (automatic) it is not shifting properly. check engine light is on. when i drive @ 30-40mph it revs between 3-4rpm when usual it would be @ 2. what could this be?


the first thing i would do would be to check the trany fluid level,make sure engine is warm and then check, some of these vws dont have dip sticks to check the trany oil level,theres a procedure to check,so if yours doesnt have a dip stick you should take it somewhere and have the level checked and also check for leaks,if the trany oil is full then i would have the trany checked, also that check engine light may have something to do with the shifting problem,have the computer scanned, the codes will help you diagnose the problem,auto zone will scan it for free, there are other parts places that will also scan and give you a read out of the codes stored in the computer, hope this helps.

May 17, 2010 | 2000 Volkswagen Golf

2 Answers

Help! 2003 Hyundai Accent problems. Transmission??


well the first thing you need to do is to pull the stored codes in the computer and see what they say and then go from there, this could be a speed sensor or a trany going bad , i dont know if this is an automatic or standard trany, start with the codes from the check engine light, autozone car parts store will scan the computer at no charge,

Apr 06, 2010 | 2003 Hyundai Accent

1 Answer

'95 cadillac eldorado driving and went to pass a car. The engine would rev up to 4000 rpm and car would slowly go. check engine light came on. I parked the car and turned it off. when i restarted the car...


well sounds like the trany is slipping, make sure trany fluid is full and clean, also check engine light will reset when ignition is turned off but if you scan computer a code can be pulled to help in diagnosing this problem. start with checking the fluid and making sure its clean and full. good luck hope this is helpful.

Dec 12, 2009 | 1995 Cadillac Eldorado

Not finding what you are looking for?
2003 Hyundai Accent Logo

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...