Question about 1989 Cadillac Sedan DeVille

1 Answer

My turn signal does not blink on its own, i have to manually flick it

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 157 Answers

Usually that means a bulb is out. There are usually more than one bulb in the rear. If they're all good and the grounds are ok, it might be the flasher itself, but go for the bulbs first.

Posted on Jul 04, 2009

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 512 Answers

SOURCE: Turn signal won't click back

the cancel cam in the multifunction switch is bad...switch needs replaced

Posted on Nov 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why only left turning signal not blinking only when headlights on? green arrow pointing left seen but not blinking. When headlights off, both turning signals work perfectly,


It sounds as though you have a wiring problem around that particular light/signal.

Check the black earth leads to the light and the signal - it may be nothing more than a 'bad earth' due to corrosion where the earth wire connects to metal.

Check the main power wires, too. It should be an easy fix .. make sure the wires are clean and secure

Apr 16, 2017 | Cars & Trucks

2 Answers

Where is the emergency flasher relay located on 2013 Rogue?


Here is what the service manual says. Looks like it is not a flasher relay but a function of the body control module.

TURN SIGNAL AND HAZARD WARNING LAMP SYSTEMSystem Description OUTLINE Turn signal lamp and the hazard warning lamp is controlled by combination switch reading function and the flasher control function of BCM.
TURN SIGNAL LAMP OPERATION - BCM detects the combination switch condition by the combination switch reading function. - BCM supplies voltage to the right (left) turn signal lamp circuit when the ignition switch is turned ON and the turn signal switch is in the right (left) position. BCM blinks the turn signal lamp.
HAZARD WARNING LAMP OPERATION BCM supplies voltage to both turn signal lamp circuit when the hazard switch is turned ON. BCM blinks the hazard warning lamp.
TURN SIGNAL INDICATOR LAMP AND TURN SIGNAL SOUND OPERATION - BCM transmits the turn indicator signal to the combination meter with CAN communication while the turn signal lamp and the hazard warning lamp are operating. - Combination meter outputs the turn signal sound with the integrated buzzer while blinking the turn signal indicator lamp according to the turn indicator signal.
HIGH FLASHER OPERATION (FAIL-SAFE) - BCM detects the turn signal lamp circuit status by the terminal current value. - BCM increases the turn signal lamp blinking speed if the bulb or harness open is detected with the turn signal lamp operating. NOTE: The blinking speed is normal while operating the hazard warning lamp.

Oct 13, 2014 | 2013 Nissan Rogue

1 Answer

Hazzard lights flash when you turn the left hand signal on


You will need to replace the turn signal switch assmbly, it is defective, nothing else causes this problem.

Jan 24, 2012 | 2003 GMC Sierra

1 Answer

My signals were acting funny (left would flick right, right would flick left or they would signal at all) but if you pushed on the flicker it might work. My husband pushed too hard i guess and now the...


You need to replace the turn signal switch. Very easy repair. I bought the replacement switch at Autozone and did it myself. The hubby kept putting it off.

Sep 19, 2010 | 2006 Dodge Grand Caravan

1 Answer

1982 s10: brake lights, hazards, and blinkers do not work.


YOU MIGHT WANT TO CHECK THE BULBS IN THE REAR LIGHTS THEY OFTEN STOP WORKING IF THERE IS A BURNT ONE . IF NOT THEN CHECK TO SEE IF YOU CAN HEAR THE CLICK WHEN YOU ENGAGE YOUR SIGNAL EACH WAY IT MIGHT BE IN THE STEERING COLOUM WHERE IT CONNECTS TO THE SIGNAL ARM

May 20, 2009 | 1993 Chevrolet S-10

1 Answer

99 BUICK LESABRE TURN SIGNAL MALFUNCTION


I had the same exact issue.
I had to buy a new multi-function switch for 200 dollars
and put it in.

May 09, 2009 | 1999 Buick LeSabre

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...