Question about 1994 Pontiac Trans Sport

2 Answers

The compressor is not engaging on 96 pontiac transport van

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 193 Answers

Ether the ac system is low,empty(leak) or a fuse or switch. The right way is to check all fuses.Check freon psi with gage set. There is a relay that engages power to the clutch on compressor. Pull relay and check for power at what would be terminal 30 on relay(look at relay)Key on.jump terminal 30 to 86 if clutch is good it will click or engage. You have a high psi switch and a low psi switch on your ac system. If low psi switch is jumped (two terminal only) ac system is low and needs to be charged.Key on and running. If non of this works than it could be the in car swiches on dash. Hope this can get you started......

Posted on Jul 21, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 61 Answers

Check wires going into it from harness.. make sure there is no break.. If not have compressor checked at autozone or advanced auto.

Posted on Jul 04, 2009

  • Jay Sackett Jul 04, 2009

    Check wires going into it from harness.. make sure there is no break.. If not have compressor checked at autozone or advanced auto.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1990 pontiac transport van won't back up in reverse


u have probaly lost reverse but u shold be able to drive forward unless u have lost every gear and not just reverse call taxi r rent a car are buy anew r used car not being funny but a transmission 4 that u could find u a newer ride

Sep 30, 2012 | Pontiac Cars & Trucks

1 Answer

I have a 97 transport van. Is the fuel pump


1997 model just work with the 1997 fuel pump; the same situation with the 1998 model and 1996 model.

For other years, they can interchangeable, as Transport 1990-1995.

Hope helps (remember rated this).

Jul 13, 2010 | 1996 Pontiac Trans Sport

1 Answer

1998 Pontiac transport van wont start:


Well you hit all the major ones, could be crank position sensor, ignition module, a bad coil pack (it should have 3), you need to check that you have spark to each plug while the engine is turning over (!!!be careful as this will hurt if you get shocked!!!), this will rule out coil packs. if you have no spark to any plug your looking at a bad ingnition module (which is what the coil packs bolt to). Hope this gets you on the right track!

Feb 08, 2010 | 1998 Pontiac Trans

1 Answer

The radio has static on all stations in my 96 transport.


if the static speed increases and decreases with engine speed, possible bad engine ground or perhaps cheap spark plug wires, or something related

Jul 12, 2009 | 1996 Pontiac Trans Sport

1 Answer

My 1997 pontiac transport van will not start


CHECK FOR FUEL AND SPARK FIRST.
CHECK ALL THE CONNECTORS ON EVERYTHING, ESPECIALLY THE IGNITION MODULE CONNECTIONS. THE CRANK SENSOR OFF THE BACK OF THE ENGINE COMES UP ALONG THE FUEL LINES AND CONNECTS TO THE IGNITION MODULE.

Jun 23, 2009 | 1997 Pontiac Trans Sport

2 Answers

96 Pontiac Transport Tranny slipping


At this point it means get some reliable hands on diagnosis....perhaps a rebuild.

Jun 09, 2009 | 1996 Pontiac Trans Sport

2 Answers

A/C compressor not engaging.


IF THE SYSTEM HAS A LEAK, THEN THE COMPRESSOR CLUTCH WILL NOT ENGAGE. TRY PUTTING SOME 134A FREON IN THE LOW SIDE(LARGER OF THE TWO LINES). AND SEE IF THE CLUTCH PULLS IN. IF IT DOES, THEN THERE IS A LEAK SOMEWHERE. IF YOU GET THE FREON WITH THE LEAK DETECTOR DYE IN IT, THEN YOU SHOULD BE ABLE TO LOCATE IT RATHER EASY. SOME CANS COME WITH A STOP-LEAK, BUT THESE TEND TO CLOG UP THE ORIFICE TUBES. HOPE THIS HELPS. PLEASE KEEP ME POSTED. THANKS FOR AN HONEST RATING AND FOR USING FIX-YA. GOOD LUCK

May 16, 2009 | 1994 Pontiac Trans Sport

2 Answers

How many spark plugs does my 1996 pontiac transport need


Your transport has a 6 cylinder engine ( the only one available tor that year), so u need 6 spark plugs. They should come w/ the gap set, but u should check them to make sure they're gapped properly, at .060 for your van.

Dec 31, 2008 | 1996 Pontiac Trans Sport

1 Answer

On a 96 pontiac transport, where is the radiator drain valve?


on the drivers side under vehicle there is a little spout (plastic) turn it counter clockwise if this does not work undo valve hose

Nov 19, 2008 | 1996 Pontiac Trans Sport

Not finding what you are looking for?
1994 Pontiac Trans Sport Logo

551 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...