Question about 2005 GMC Yukon Xl Denali
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
i think what you are talking about is the front differential. you will wanna put gear oil in it. the correct weight would be found in your manual.
Posted on Feb 20, 2009
SOURCE: 2003 chevy tahoe no rear heat
I know the earlier tahoe's have two heater lines running from the engine compartment to the rear under the vechile. Those lines could be clogged or pinched shut. What you do is get two hose locking pliers. Go under your truck, they are two metal lines that turn into rubber and back into metal again farther down the line. First, checked for pinched lines. If none, find where the rubber hoses are, clamp them off, remove from metal lines and drain. Use garden hose to flush fresh water through. When water comes through at high pressure and pretty clear, it should be done. Reconnect hoses, top off radiator fluid and it should be fine.
Posted on Feb 21, 2009
SOURCE: level ride shocks not working.
have a self test run buy the dealer on the self leveling system, most common causes are the ride height sensor, the air pump is defective or the pump relay is defective.
Posted on Mar 06, 2009
Tips for a great answer:
Dec 04, 2016 | 2003 GMC Yukon Denali
Oct 24, 2016 | 2002 GMC Yukon Denali
Feb 08, 2016 | GMC Cars & Trucks
Jan 22, 2016 | Cars & Trucks
Aug 08, 2015 | 2007 GMC Yukon XL Denali
Feb 15, 2014 | 2005 GMC Yukon Xl Denali
Sep 17, 2011 | 2005 GMC Yukon Denali
Sep 15, 2011 | 2003 GMC Yukon Denali
Feb 17, 2011 | 2005 GMC Yukon Xl Denali
Nov 04, 2009 | 2003 GMC Yukon Denali
289 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: