Question about 1994 Chrysler Concorde

1 Answer

94 concorde as stated earlier car wont start. changed fuel pump it pumps when i jumper wired the fuel relay. changed cam sensor changed knock sensor changed coil pack.when turning key car cranks over no power to coil fuel pump etc. fuses and relays under dash and hood are ok

Posted by on

  • Mike Butler
    Mike Butler May 11, 2010

    Checked, Auto shut down relay ?

  • quinton jones Aug 16, 2012

    i did all of that still nuthin

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 6,826 Answers

Change crank sensor? if so replace control module (ignition module)

Posted on Jul 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 94' chrysler concorde. How do I check to


Have someone stand or lie down close to the gas tank when you first turn the key on WITHOUT STARTING IT. They should hear the pump running to build up pressure. If not, check the fuse box under the hood for a blown fuse or bad pump relay.

Jan 12, 2013 | Cars & Trucks

1 Answer

I have a 94 chrysler concorde. The problem is it won't start, I have replaced the fuel pump and the fuel pump relay fuse. And it still won't start. What should I do now?


check see if you getting spark if not.have vechicle code scan could have faulty ECM .faulty camshaft sensor and crankshaft sensor.make sure engine has been tuned up.replace fuel filter change spark plugs and wires. before engine can run need fuel and spark.either one not working car will not crank.

Jan 12, 2013 | Cars & Trucks

2 Answers

1994 CONCORD NO POWER TO FUEL PUMP, NOT FIRING AND DOES TURNOVER, REPLACED CRANK SENSOR AND CAM SENSOR, TRIED DIFFERENT RELAY FOR FUEL PUMP-STILL WON'T START?


NO POWER TO FUEL PUMP......CHECK ALL IN LINE WIRING
NOT FIRING... START WITH COIL PACK, DIST CAP ETC...PLUGS/WIRES??????
"HOT WIRE" (DIRECT W/ FUSED JUMPER) TO FUEL .PUMP....NO - GO,,,BAD PUMP

Oct 09, 2011 | 1994 Chrysler Concorde

1 Answer

I am starting problem with my chrysler concord 2000 3.2 if din't start it for more than 10hrs this problem happens when i try to star its cranks but wont start i did the test at chrysler and they...


make sure the fuel pump relay is working. just put one in from another place. same size, to see if thats it. or your fuel pump is bad. is it getting spark!

Sep 21, 2011 | 2000 Chrysler Concorde

2 Answers

My 1995 Volvo 850 will not start. I think it is the fuel pump. I tryed a procedure where I removed the fuel pump relay and jumpered the sockets for blades 85 and 15. there was no help in starting the car...


another way to test it
unplug any fuel line you can locate tell a friend to start key one turn only if the line squirts fuel then pump is working and it might need regulator
if not then pump is gone

Jun 08, 2011 | 1995 Volvo 850

1 Answer

Where is the Fuel Relay located on a 94 Oldsmobile Bravada?


the fuel pump relay is on the driver side firewall its a bracket with two relays on it. the relay closes to the fender is the one for the fuel pump. if you want to do a quick test of the relay is to run a jumper wire from orange wire to the grey wire you pump should start working.if it does work then replace the relay. if it doesnt work. run a jumper wire from the battery to the grey wire if the fuel pump still doesnt work replace the fuel pump, however if it does work you have a short in you wires. a good back yard fix for this problem is to run a wire from the battery to the orange wire. hope i didnt confuse you let me know if you need more help.

May 14, 2010 | 1994 Oldsmobile Bravada

2 Answers

Chrysler wont start


I CHANGE CAM AND CRANK SENSOR,FUEL PUMP,COMPUTER BRAIN BOX AND COIL PACK STILL GETTING NO FIRE UNLESS I JUMP A FIRE WIRE FROM BATTERY

Jul 02, 2009 | 1994 Chrysler Concorde

Not finding what you are looking for?
1994 Chrysler Concorde Logo

522 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...