Question about 2008 Ford Ranger 2WD

1 Answer

2004 f150 automatic i dont no when it is in gear because the hand doesnt move on shift on steering wheel is it a band or something broke inside

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 100 Answers

Shift cycle (left to right) is P, R, N, D, OD(unless a button for it on top of shift lever.), 1, 2 so its either 6 or seven shift points. It might be a simple loose connection that can easily be repaired.

Posted on Jul 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 pt cruiser shift cable??


Check the linkage or cable ,something has broken.

Jul 30, 2016 | 2004 Chrysler PT Cruiser

1 Answer

My gear shifter is loose and and will move from r to d but does not shift truck out of reverse. The shifter hangs loose. Is there a pin broke or is the shifting cable broke?


1997 F 150 Gear Shift Repair - YouTube

? 5:22
www.youtube.com/watch?v=MsHV09_3JWI
Oct 21, 2012 - Uploaded by DrBobaliscious
... and strengthen a broken gear shift lever on a 1997 Ford F-150.... Loose shift lever on Steering wheel Ford F150 F250 F350 E150 E250 E350

Sep 29, 2015 | 1997 Ford Expedition

1 Answer

My gear shift broke on my 2004 toyota sequoia just moves up and down without shifting gears


You need to get under the hood or under it and check the linkage from the shifter to the box, likely something has come off.

Jun 02, 2015 | Toyota Cars & Trucks

1 Answer

Steering wheel is locked on my 95 ford f150 xl..it starts and goes into gear but the steering wheel won't move..it is locked


you can break the lock by pulling down on the steering whell very hard. or if your ignitons swith is bad you have to get a new one

Nov 13, 2011 | 1995 Ford F150 Styleside Regular Cab

1 Answer

Gear stick will not move from park !


Make sure you car is actually in PARK, Easy to do, Just disengage the parking brake (emergency brake) and attempt to push your car both forward and reverse to ensure your car isnt in neutral. If you cant budge the vehicle your good to go! If it rolls forward it may be in neutral or a forward gear. if it rolls backwards it may be in neutral or reverse. If it rolls both directions its in neutral. On that note if it moves at all skip to the third step (***) and make sure the transmissions shift bracket is in the park possition. Depending on your cars transmission model the parking gear is located all the way left to the farthest possition or all the way right to the farthest possition) One direction will put you in Park, the other in will put you in 1st gear, If your in 1st gear the linkage should be too far away from the shift plate to connect if your column says you are in park. DO NOT ATTEMPT TO START YOUR CAR WHILE IT IS IN A DRIVE GEAR AND THE LINKAGE IS DISCONNECTED IF YOU ARE ABLE TO START YOUR CAR IN ITS CURRENT STATE DO NOT MOVE THE TRANSMISSIONS SHIFT BRACKET UNTIL LATER IN THIS INSTRUCTIONAL!!!!!

* Floor shift automatic, the push pin lever (located inside your shifter/gear stick) may be malfunctioning. You have to pop the grip off and inspect the white plastic pin inside the shaft to see if it is damaged, also check inside the grip while you press the safety release (shift lock button) to ensure the internal slide mechanics are propperly working). Also check for anything obstructing the levers movement inside the floor housing.

** Column Shift. Make sure your pull pin lock is working properly (disengages the shift lock when you pull back the gear shift before you select a gear) if its broke theres two possible behaviors you'll experiance -1. You cant pull the gear shift back at all or -2. No effort or less than normal effot is required to pull back the gear shift. If all that checks out then you have to inspect the steering column linkage bar (you may have to remove some of the steering column housing to view it. Make sure the bar isn't bent or that its movement isnt obstructed.

***Automatic Transmission Linkage Check - Look under the kick panel located above the gas and brake pedals.........Once linkage is located under the dash (kick panel) disconnect it and try the gear shift. If the cable moves under the dash then reconnect it and move on to the next step.
Now block the wheels and climb under the car and disconnect the linkage from the transmission and have someone work the gear shift while you see if the cable is operating propperly, if the linkage moves (as it should) then try shifting the transmission back and fourth by hand while the linkage is disconnected., If the shift bracket feels stiff or is dirty clean it off with non corosive chemicals so you dont damage any seals. If the bracket operates smoother go ahead and reconnect the linkage and try shifting with the column again. Be sure to move the shift bracket back to the park position and make sure your shifter column is in park as well before you reconnect the linkage, if you dont you are sure to run into more issues.

Hope this helps you out! If all the mentioned area's above are in working order then your problem is with the car's transmission and you should take it to a speciallist.

Feb 03, 2011 | 1995 Jaguar XJ-R

3 Answers

Shifting problem


press on brake? if so, stil non op, check connection, loose off, if ok FUSE, or bad switch, brake light work ok?

Oct 05, 2008 | 2001 Ford F150 Styleside SuperCrew

1 Answer

92 yj front axle


it actually moves a shift fork onto a spline. try moving fork by hand.

Aug 05, 2008 | 2004 Jeep Wrangler

1 Answer

Gear shift assembly


This is a common problem, I had the same issue, mine completely broke off. You can buy the new sleeve with a new rod at the dealer. The replacement is quite simple. You need to remove the upper and lower covers for the steering column, then drop the sterring column with by removing the four bolts. There are four bolts that hold the sleeve in.

Jul 20, 2008 | 1993 Ford F150 SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...