Question about 2000 GMC Sierra

Open Question

Can't get my brake lights to work on my 94 sierra 2500 all other lights work, fuses are good, I replaced the brake switch, tail harness is all together and looks good. I am stuck. Any body?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1054 Answers

SOURCE: 94 toyota previa brake lights not illuminating

CHECK THE BRAKE LIGHT SWITCH UNDER THE BRAKE PEDAL

Posted on Jan 08, 2009

dennymulford
  • 1055 Answers

SOURCE: No brake lights, or no signal lights

brake lights and turn signals work off the same curcit, it could be the fuse or the brake light switch !!!!!!

Posted on Jun 06, 2009

  • 1 Answer

SOURCE: dodge 2500 ram diesel no tail lights and my abs

replaced the IPM (the fuse box) it was shorted

Posted on Oct 26, 2009

  • 194 Answers

SOURCE: How to replace rear brakes in 2005GMC Sierra?

jack up truck support it remove tire you should see the caliper,on the back side you will see two small bolts lossen the bolts remove it might require some prying support the caliper,check the rotor if has grooves in it it should be turned. use a c clamp to force the piston back in the caliper be careful of the rubber seal put the new pads on reinstall the caliper tighten the bolts start the truck pump the brakes a few times go back check for leaks if none put tire back on remove support lower to ground test drive

Posted on Nov 02, 2009

  • 1 Answer

SOURCE: No dashboard lights or tail lights but I got Blinkers and brakes

im having the same problem help please

Posted on Nov 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The left tail light on my trailer doesnt work.the stop and turn signal works . is there a fuse for it? i have 2011 gmc sierra 1500


There is a tail lights fuse for the truck, but not for the trailer.
First, check that your left tail light on the truck is working, if not fix the problem (new bulb, bad contact, fuse).
Then the obvious suggestions regarding the trailer are: Check the tail light portion of the bulb to be sure it is not blown. If good (best to put in new one to be sure), then check the wiring from the front of the trailer all of the way to the non working bulb, including every connection and at any place it is secured to the trailer frame. If all is good with the trailer circuit and bulb, then check the truck's trailer connector, including any adapters. If by chance the truck is wired with a flat 4 wire harness the problem may be solved (but usually the blinkers are the problem). Modern trucks require a 5 wire harness which self adapts to the standard 4 wire trailer circuit. Check for dc power (12 volts) from the truck's female connector. One wire will be ground, others will be taillights (turn on headlights), brake lights (have someone press brake pedal), and blinkers (turn on switch and blinkers).

Oct 09, 2016 | 2011 GMC Sierra 1500

1 Answer

HELP!! 1996 GMC Sierra Has no brake lights or Hazards but blinkers and running lights work


beleive there is a junction box on those models that main tail lights harness comes too then is distributed out in seperate smaller harnesses.

Apr 28, 2013 | 2000 GMC Sierra

2 Answers

I have a 2000 chevy 2500 and the tail lights, tag lights and brake lights have stopped working, I checked the bulbs and they are good, fuses are good. Have not replaced the brake relay under the hood. Do I...


check for power at the wires going intop the tail lights, real common that the circuit board is bad, but unlikely both at the same time. The tag, tail lights and brakes are 2 different systems. Do the turn signals work normally? if so the wiring from the turn signal switch to the brake lights is GOOD. the stop light switch had\s a ORANGE wire that should have 12V if not ck STOP LPS fuse, when brake pedal is depressed, the WHITE wire is 12V (at the stop light switch) if that is OK, the turn signal switch COULD be bad. The wiring harness plug is near the back left under the tailgate, see if that is disconnected?

Aug 04, 2011 | 1999 Chevrolet K2500

1 Answer

Tail lights not working. fuses look good, brake lights work, hazards work, but running lights don't- gmc sierra 2500


do the front marker/park lights work if not you could have a bad light switch on the tail light side of the switch.you need to check the brown wire at the back of the truck in the wiring harness as this is the tail light wire that feeds the bulbs.if you have power there then you will have to check for power at the socket,if no power at the socket but were you check the wire then there is a problem between the two that you will have to check out.if there is no power when checking the wire then you will have to check for lose of power between the switch and rear wiring.make sure the fuse is good by using a test light and not by looking as sometimes they look good but don`t work.

Jul 11, 2011 | GMC Sierra 2500 Cars & Trucks

1 Answer

Brake lights/tail lights won't work


tail light fuse and brake light fuse, and they are marked, if they are good then you have a bad light switch or a bad turnsignal switch assembly harness.

Jun 25, 2009 | 1994 Plymouth Sundance

1 Answer

No brake lights, or no signal lights


brake lights and turn signals work off the same curcit, it could be the fuse or the brake light switch !!!!!!

Jun 05, 2009 | 2000 GMC Sierra

2 Answers

Tail light problems on 1996 GMC Sierra pickup


I had similar problem with my 97 sierra... I only lost 1 light, then brake lights stayed on all the time... turns out the "t" connector for the trailer harness under rear bumper was rotted inside...unplugged the 2 parts of the harness and pluged them into each other with out the "T" harness.... everything works great... Hope it helps ya

Jan 01, 2009 | 1996 GMC Sierra

Not finding what you are looking for?
2000 GMC Sierra Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...