Question about 2003 Ford Mustang

2 Answers

How do u know rear wheel bearings are bad - 2003 Ford Mustang

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 59 Answers

First if you have "disk brakes", you can simply jack up one side and see if it "wiggles", while puslling (gently) from 12;00-6:00, also "spin the wheel to see if it makes any "weird noises", if you are (mech) inclined, and I don't mean anything bad, you should pull the disk and re-pack the bearings every five years anyway,contact me if you need more sugest's, god bless

Posted on Jul 03, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 32 Answers

As wheel bearings wear, clearances will no longer be tight. This "loosening" up of the part, will often times make an audible whine. The whine will be proportional to your vehicle speed.

Posted on Jul 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why am I able to shake my back tires?


Yes , your wheel bearings are bad !!!!!!

May 25, 2015 | 1998 Cadillac DeVille

1 Answer

Scion xb rear wheel bearing noise


my scion xb is at the dealership right now because i heard the same noise coming from the rear tires, i was told today that both my rear wheel bearings were bad and have to replace them, $300 plus each for the part alone, $500 for with labor.

Jul 15, 2012 | 2011 Scion xB

1 Answer

If my wheel barrens or wheel hub is bad will the wheel come off?????


It depends on the severity of the damage. I had driven an Escort that had a bad wheel bearing for a year before i replaced it (I did not know it was a bad bearing) and it held, but that was a rear wheel bearing.

Typically, it is highly recommended that you change it out as soon as possible and try not to drive on it for the reason that the wheel could come off, and it could cause harm to yourself and others.

Jun 12, 2012 | Cars & Trucks

2 Answers

There is a very loud humming noise coming from the front left tire! plz I await your reply. Thks.


You probably have a bad tire or wheel bearing. Either the tire is cupped causing humming noise or grease inside sealed wheel bearing is burnt up. I would take front tire and move to the back of the car. Then drive again. If noise stays the same you probably have a bad wheel bearing. If noise moves to the back of the car than you may need to replace the tire. Most likely it is the wheel bearing, I replace them all the time at my shop

Oct 27, 2010 | 2005 Buick LeSabre

1 Answer

Does anyone know the torque wrench settings for the rear hub/wheel bearing nuts on a 2002 Peugeot 206 1100cc please? Also the road wheel bolts?


Tightening torque for the hub nut is 200Nm and the road wheels are 85Nm

NOTE: The rear wheel bearings are remowned on these cars for sticking to the stub axle quite badly, and often have to be forced off using a slide hammer on the drum, it is quite common to end up damaging the wheel bearing, so be prepared to replace this as well in this event

Jan 23, 2010 | 2005 Peugeot 405

4 Answers

Have 2002 ford explorer,right rear wheel feels loose. checked lugs, all tight, pulled wheel and rotor is wobbly, losse. what's the cause?


You need a wheel bearing....don't drive it. Tow it to a dealer.! Ford wheel bearings are cheaper than aftermarket.
250-300 dollar fix.

Dec 31, 2009 | 2002 Ford Explorer

1 Answer

I hear a humming noice in the rear. What could it be and how do I fix it.


sounds like a bad wheel bearing..if drum brakes,remove drum and center cap from wheel bearing..remove center nut and pull bearing from spindle..replace hub/bearing assembly and center nut..if disc brakes,remove caliper/rotor,and hub/bearing assembly

Jun 03, 2009 | 1995 Chrysler Sebring

1 Answer

Noisy rear bearing?


Is isnt the rear end it would be very bad shaking and wouldnt last long because it would throw a bearing out. So its most likly the wheel bearing and you can just take it to a local automotive shop.

Aug 12, 2008 | 1991 Toyota Previa

Not finding what you are looking for?
2003 Ford Mustang Logo

232 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...