Question about 2005 Toyota Corolla
Crank the tensioner to get some slack in the belt and slide it off the uppermost, most easily accessible pulley. Remove the old belt. Route the new belt in accordance with the belt routing diagram and crank the tensioner the same direction as before to begin getting the belt over the uppermost pulley. Slide a screwdriver under the belt and over the pulley to leverage the new belt on. Release the tensioner and check for belt tautness. If the belt is loose, you've either purchased the wrong size or have misrouted the serpentine belt.
Posted on Jul 03, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
loosen the bolt that is holding the adjuster of the alternator. loosen the belt by pulling it and the alternator would slide in. remove and replace the belt.
do the reverse on installation.
remember to tighten all bolts of the adjuster and alternator after tightening the belt.
tnx 4 using fixya,
Posted on Sep 13, 2008
I can get you a diagram on monday but it goes from the alternator to the power steering pump then around the tensioner pulley then around the crank pulley then to the a/c compressor then pull on the tensioner to give you some slack and slip it on the waterpump.I hope that helps.Let me know if you still need the diagram
Posted on Nov 29, 2008
To reset the system. Turn the ignition key to the "OFF" position with the odometer reading shown. Turn the ignition key to the "ON" position while holding down the trip meter reset knob. Hold down the knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.
Posted on Jun 12, 2009
SOURCE: 2005 Toyota Corolla Radio fuse
Pg. 250 of your 2005 Owner's Manual shows the location of the Fuse Boxes. There is one under your hood on the driver's side and the other is under the dash just to the left of steering wheel. Pg 272, will show you how to replace the fuses. Pg. 286-287 gives a diagram and description of each fuse and what part of the electrical system it enables.
This portion of the electrical system correspondeds to the fuse in position 32 on pg. 287 of the manual.
Your going to have to get on your back with a flashlight and open up the fuse box under the dash by the steering wheel. The lid of the fuse box shows the positions of the fuse and their amperage rating. Like I said, replace the fuse in postion 32 (15 Amp). There is a spare 15 Amp fuse in the fuse box under the hood (easy to get to, see the diagrams in the owner's manual). There is also a fuse puller tool next to the spare fuses.
Posted on Aug 11, 2009
if you have a 1ZZ engine
4.2 quarts, 4.4 quarts with oil filter change
if you have the 2ZZ engine (XRS model) it is
4.4 quarts, 4.6 quarts with oil filter change
NOTE these are updated capacities that reflect changes identified in TSB: TSB-0134-08 issued July 15, 2008.
Your owners manual will reflect a lesser quantity that Toyota has since revised.
Posted on Sep 10, 2009
Tips for a great answer:
Jan 06, 2012 | Cars & Trucks
Oct 29, 2010 | 2005 Toyota Corolla
Apr 19, 2010 | 2005 Toyota Corolla
Mar 30, 2010 | 2005 Toyota Corolla
Mar 24, 2010 | 2005 Toyota Corolla
Oct 23, 2009 | 2005 Toyota Corolla
Feb 16, 2009 | 2005 Toyota Corolla
Feb 09, 2009 | 2005 Toyota Corolla
Jul 27, 2008 | 2005 Toyota Corolla
580 people viewed this question
Usually answered in minutes!