Question about 1997 Saturn SL

1 Answer

My service engine light will not go off and i changed the ignition coil and everything and it will not go off what can i do

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 55 Answers

Toni
U need to take it to Advance Autoparts store and let them do a scan of your OBII and get the codes then go from there as to fixing the car. It takes three or more drive time cycles to clear a code if U don't use a scan tool to clear the codes.

Hope this helps U

Matt

Posted on Jul 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error Code P0351 for a 2005 Toyota Avalon


Possible causes
Faulty Ignition Coil 1
Ignition Coil 1 harness is open or shorted
Ignition Coil 1 circuit poor electrical connection
Faulty Engine Control Module (ECM)

What does this mean? When is the code detected? Each ignition circuit is continuously monitored by the Engine Control Module (ECM). The test fails when the ECM does not receive a valid pulse signal from the ignition coil. Possible symptoms Engine Light ON (or Service Engine Soon Warning Light) Lack/Loss of Power Engine may be harder to start Engine hesitation Rough engine idle P0351 TOYOTA Description: The ignition system on the vehicle uses individual ignition coils for each cylinder. The Engine Control Module (ECM) controls each ignition coil operation. The ECM sends a ON/OFF signal to energize the ignition coil to create a spark at the spark plug when a spark is required at the cylinder.

May 29, 2017 | Toyota Cars & Trucks

2 Answers

Changed everything for tune up still no spark


What make , model an year vehicle ? Is it coil on plug ignition system or dis ignition . Did you test for battery voltage at the coil or coils ? Is the powertrain control module controlling the coils ? Does it have a ignition control module ? Automotive Engine Ignition Coil Testing Repair How to test an ignition coil and ignition module with test light

Mar 17, 2015 | Cars & Trucks

1 Answer

I have a p2323 code and replaced the spark plugs. I pulled the battery cable and after a week the code came back. What could be causing this.


P2323 Dodge - Ignition Coil Secondary Number 8 Circuit Condition - Faulty spark plug or coil boot
- Faulty Ignition Coil 8
- Ignition Coil 8 harness is open or shorted
- Ignition Coil 8 circuit poor electrical connection
Possible symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Engine may be running rough

P2323 Dodge Description
The ignition system is controlled by the Powertrain Control Module (PCM) on all engines. Each cylinder is equipped with 1 dual-output coil. Meaning one coil mounts directly over one of the dual spark plugs for 1 high-voltage output.
Battery voltage is supplied to all of the ignition coils positive terminals from the ASD relay. If the PCM does not see a signal from the crankshaft and camshaft sensors (indicating the ignition key is ON but the engine is not running), it will shut down the ASD circuit.
Base ignition timing is not adjustable. By controlling the coil ground circuits, the PCM is able to set the base timing and adjust the ignition timing advance. This is done to meet changing engine operating conditions.
The PCM adjusts ignition timing based on inputs it receives from:
- The engine coolant temperature sensor
- The crankshaft position sensor (engine speed)
- The camshaft position sensor (crankshaft position)
- The manifold absolute pressure (MAP) sensor
- The throttle position sensor
- Transmission gear selection
Read more: http://engine-codes.com/p2323_dodge.html#ixzz3UfaKMLrR

I hope this helps!

Ted

Mar 17, 2015 | 2011 Dodge Ram Pickup 1500

2 Answers

P0303 Flashing Service Engine Light when driving


P0303 ignition misfire on cylinder #3.
Possible Causes:

1.Fuel injectors, related wiring, sensors, computer issues
2. Running out of gas, or poor fuel quality
3. Evaporative emissions system (EVAP) concerns: fuel vapors leaking into engine
4. Incorrect Fuel Pressure
5. EGR system concerns: leaking EGR valve or restricted ports
6.Base engine concerns: low compression, valve train problems and timing issues
7. Ignition system concerns including, but not limited to:
Faulty spark plugs
Faulty coil or related wiring
Ignition module or related wiring issues
Ignition related sensor faults or wiring issues

You will have diagnose each element until you find root cause.
And it could be more than one element faulting out.
You

Jan 27, 2015 | 2002 Nissan Pathfinder

1 Answer

93 cherokee no fire to coil what could be the problem please help


Look at your dash gauges when you turn on the ignition....is the check engine light coming on? If not, your ecu computer needs to be repaired since the ecu will not sent power to the main relays until that check engine light comes on. No power to the main relays means no power to your ignition coil or fuel pump. Repair services are available.

Mar 17, 2013 | 1993 Jeep Cherokee Country

1 Answer

Ford 2003 escape codes readed


Cauases or fault codes are not cut and dry, but here are the possible causes of codes P0316 and P0306 which are related codes.
P0316 - Engine Misfire Detected on Startup
Symptoms - Engine Light ON (or Service Engine Soon Warning Light)
- Engine fails to start
- Engine runs rough Possible causes - Crankshaft Position (CKP) sensor harness is open or shorted
- Crankshaft Position (CKP) sensor circuit poor electrical connection
- Faulty Crankshaft Position (CKP)
- Ignition System
- Fuel Injectors
- Running out of fuel
- Fuel Quality
- Faulty Engine Control Module (ECM) P0306 - Cylinder 6 Misfire Detected Symptoms - Engine Light ON (or Service Engine Soon Warning Light)
- Lack/loss of power
- Hard start
- Engine hesitation
Possible causes - Faulty spark plug 6
- Faulty ignition coil 6
- Ignition coil 6 harness is open or shorted
- Ignition coil 6 poor electrical connection
- Clogged or faulty fuel injector 6
- Injector 6 harness is open or shorted
- Injector 6 poor electrical connection
- Improper spark plug 6
- Insufficient cylinder 6 compression
- Incorrect fuel pressure
- Intake air leak

Jan 17, 2012 | Cars & Trucks

2 Answers

I have a 2004 VW Passat the engine light came on had it diagnosed the code is P0322 what does it mean and how is it fixed? Thanks


Symptoms- Engine Light ON (or Service Engine Soon Warning Light)
- Lack/Loss of Power
- The engine may be harder to start
- The engine may stumble or stallPossible causes- Ignition/Distributor engine speed sensor harness circuit is open or shorted
- Ignition/Distributor engine speed sensor poor electrical connection
- Faulty Ignition/Distributor engine speed sensor
- Faulty Crankshaft Position sensor
- Low battery charge
- Faulty Engine Control Module (ECM)When is the code detected?The P0322 code is triggered when the Engine Control Module (ECM) detects no signal.P0322 VOLKSWAGEN DescriptionIgnition failure sensor is used to check whether the spark ignition is occurred correctly or not and also used to tachometer drive. The sensor monitors the voltage difference between a resistance which is on the battery circuit for ignition coil. When the ignition coil works properly, the electric current through the resistance is detected as voltage drop. This is confirmed for every ignition event with the crankshaft sensor and the camshaft sensor. If ECM detects a malfunction, no ignition is possible, so the engine would not start. If there is no ignition signal for a predetermined cycle for one or two ignition coils, an ignition coil circuit failure exists.

Nov 10, 2011 | 2004 Volkswagen Passat

1 Answer

P0352 code came up what might be the problem


P0352 - Ignition Coil B Primary/Secondary Circuit Malfunction
The ignition signal from the Powertrain Control Module (PCM) or Electronic Control Module(ECM) is sent to and amplified by the power transistor. The power transistor turns ON and OFF the ignition coil primary circuit. This ON/OFF operation induces the proper high voltage in the coil secondary circuit.

When is the code detected?
The test fails when the Powertrain Control Module (PCM) or Electronic Control Module(ECM) does not receive a valid pulse signal from the ignition coil.

Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Lack/Loss of Power
- The engine may be harder to start
- Engine hesitation

Possible causes
- Open or short in the ignition coil circuit
- Ignition coil circuit shorted to ground
- Ignition coil connector
- Damaged ignition coil
- Damaged PCM or

Possible solution
- If damage, repair ignition coil circuit
- Replaced ignition coil
- Replaced PCM or ECM


Hope helps with this (remember to rate this answer).

Jan 14, 2011 | Mazda RX-8 Cars & Trucks

Not finding what you are looking for?
1997 Saturn SL Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...